In a 2004 Jeep Liberty, the color code for the tail light wiring is typically as follows: the left tail light uses a brown wire for the tail light and a yellow wire for the turn signal, while the right tail light uses a brown wire for the tail light and a green wire for the turn signal. Always refer to a specific wiring diagram for your vehicle or consult a repair manual for the most accurate information.
Using the search term " 2004 jeep liberty wiring diagram" in Google, it displays an oversized image. If you click on the image, it goes to a website where you can save or print it.
See sources and related links below for the 2004 Jeep Liberty Brake Light Lamp Numbers.
w to replace center brake light in 2004 jeep liberty
It is not a direct swap. The wiring, computers, plumbing, etc are different.
Did not receive a owners manual when I purchased my Jeep Liberty 2004. There is a warning light that looks like a transmission lighting up - what does it mean?
Your windshield washer fluid is low.
just behind the leg on the brake peddle
You can find a wiring diagram for your 2004 3500 Chevy Express tail light amp most Chevrolet dealerships. Chevrolet service manuals will have the diagram and can be obtained from most local libraries.
For a 2004 Jeep Rubicon, the tail light wiring schematic typically involves several key wires: the ground wire (usually black), the tail light power wire (often brown), the brake light wire (usually red), and the turn signal wires (typically yellow for the left and green for the right). To access the wiring, you'll need to remove the tail light assembly, which usually involves unscrewing a few bolts. Always refer to a service manual or wiring diagram specific to your model for precise color codes and connections. Be sure to check for any fuses as well if you're experiencing issues.
Read the owner's manual.
buy the wiring harness adapter for 14.99
Desperate Housewives - 2004 Color and Light 2-7 is rated/received certificates of: USA:TV-14 Venezuela:PG-13