answersLogoWhite

0

What else can I help you with?

Related Questions

What size screws fit Mazda miata license plate?

6mm


What size screw is used for the rear license plate c280 mercedes 1996?

based on another thread, this is the info i found. These are the parts indicated on EPC. However, I went to the dealer with these part #s and they are just for the front license plate. Part # 0019904236 (5x12) is somewhat of a sheet metal screw which you need since the front license bracket is a hard plastic material and the holes on there need to be threaded by a sheet metal screw so the license plate itself can be screwed securely onto the bracket. This screw is perfect length if you are mounting your front license plate without a license plate frame. As for part# 0019846429 (5x16) this is a longer screw for mounting the front license bracket to the bumper. Don't need to worry about this one. The license plate screws for the rear are completely different as there is a metal mounting plate adapter that already has pre-threaded holes. You need metric screws M6 1.0 (1.0 is the thread type). Default length is 16mm but you need 10mm if you wish to mount your rear license plate without a license frame otherwise the longer length will drill marks into the rear lid and with a gap between the plate and the screws. I can't find the M6 with 10mm length at my local hardware store. I will need to stick with the ones that came with our car M6 16mm (part# 007985006197) but will need a license frame on it for it to work. I know there's not too much on this matter and no one really cares too much if the screws on your car already work. However, dealers just slap on whatever screws they have on their service bin upon delivery and no one knows what screws you really need for the car. This explains why some folks here complain about loose license plates. Anyhow I have attached both the front (left) and rear screws (right).


What size screws do you need to install rear license plate on a 2007 Pontiac Vibe?

i think it is 8x1mm - you can get them from home depot or lowes - get the ss version - won't rust


What size screws should be used for pocket holes?

Pocket holes typically require 1 1/4-inch coarse-thread screws for softwoods and 2 1/2-inch coarse-thread screws for hardwoods.


How do you replace License Plate Bulbs on 2004 Nissan Sentra?

There are two (2) lights directly above the license plate. Each light has two (2) screws. Remove these screws and the covers. Lights pop out with little effort. Replace bad bulbs with size 194 lights. These are approx $2 at walmart or an auto parts store. Once bulbs are replaced, reattach covers with the screws and you should be good to go.


What number bulb is used on 2001 volkswagon jetta license plate?

License Plate Light Bulb Size: 6418


What size screw is used for the rear license plate for a 2006 c280 Mercedes?

For a 2006 Mercedes C280, the rear license plate typically uses M6 x 1.0 screws. These screws are often either stainless steel or zinc-coated to resist corrosion. It's advisable to check the specific requirements in the vehicle's manual or with a dealer for exact specifications, as variations may occur.


What size screw for samsung 40 inch ue40es550 mount?

M8. 8mm thread. The length will depend upon the thickness of the mounting plate of your chosen bracket. The wall mounts all come with a large assortment of screws so you can find the righ size.


What size nut and bolt license plate?

Varies by manufacturer.


How do you change a license plate bulb in a 2001 Chevy impala and what kind of bulb does it need?

AnswerThere are two screws for each bulb fixture. Get down on the ground and you'll see them at the tag light. They are 7mm screws. Unscrew them til loose. You don't have to take them off all the way. After unscrewing them, slide lighting fixture away from bumper, and twist the bulb to the left, and pull it out. The license plate light bulb size is 194. You will probably have to take off the license plate in order to reach the bulb fixtures.


What is the thread size in the screws in a h60 corsair CPU cooler?

The screws in the H60 Corsair CPU cooler typically use a thread size of M3. However, it's advisable to check the specific model's manual or technical specifications for the most accurate information, as variations may exist.


What is the license plate bolt size for 2005 Honda accord?

M6x1.00x20mm