0
What else can I help you with?
What is the proper way to charge a 15 ton compressor?
read the manufacturers logo on the side of the unit and weigh the charge
What size capacitor do you need for a 1 ton compressor?
For a 1-ton compressor, you typically need a capacitor rated between 30 to 40 microfarads (µF) for the start capacitor and around 5 to 15 µF for the run capacitor, depending on the specific model and manufacturer. It's important to consult the compressor’s specifications or user manual for the exact capacitor size required. Always ensure that the voltage rating of the capacitor is sufficient for your application, generally around 370 volts or higher for HVAC systems.
What ton is goodman model A49-15?
it is a 4 ton unit
About how much does a ton of sand cost?
depends on what kind of sand you want. Prices can vary from $15 to $30.
What is the price per ton for gravel in Arkansas?
Lee County reports the road department pays about $15 per ton or about $22 per yard for fill. Hallwood Petroleum LLC reports (2007) 4001 Tons of shale location fill and gravel road cost $15 per ton in E. Arkansas. 18 tons of crushed limestone in Benton county cost about $450 delivered. This is unsorted fine limestone or unsorted SB2.
What is the cost per ton to detailing and estimating rebar?
Cost vary according to the size and complexity of the job.DETAILINGA high of $30+ per ton USD for smaller jobs (100 tons+/-) with smaller rebar (#3,#4,#5), and a low of $15 per ton for larger jobs (1000+ tons) with larger bars (#11).ESTIMATINGFrom $5 to as low as $1 per ton again depending on the size and complexity of the project.
How many pounds are there in 15 tons?
There are 2000 pounds in one ton. Therefore, 1.5 tons is equal to 1.5 x 2000 = 3000 pounds.3000 lbs1 US (short) ton = 2000 lb1 UK (long) ton = 2240 lb1 tonne (metric) = 2204.6 lb
What did a ton of hay cost in 1948?
The United States Department of Agriculture's National Agricultural Statistics Service (USDA-NASS) records go back only as far as 1964, when a ton of baled hay was selling for $19 - $20. It seems a reasonable guess that it would have sold in 1948 for $10 to $15 per ton.
How much does a ton of ca6 gravel cost?
The cost of a ton of CA6 gravel typically ranges from $15 to $30, depending on factors such as location, supplier, and market demand. Additional costs may apply for delivery and any necessary equipment for installation. It's advisable to check with local suppliers for the most accurate pricing in your area.
Approximately how much does a hydrogen compressor consisting of 15 bar inlet pressure and 200 bar outlet pressure cost?
73 pence and the finest silk button in all the land!
What size and type of capacitor is best for A 5 ton 15 seer ac unit?
For a 5-ton, 15 SEER air conditioning unit, a common capacitor size is typically between 35 to 60 microfarads (µF) for the compressor and around 5 to 10 µF for the fan motor. The type of capacitor usually recommended is a dual run capacitor, which can support both the compressor and fan motor in a single unit. It's essential to check the unit's specifications or consult a professional to ensure the correct capacitor is used, as variations may exist between different models.
What is stone price per ton?
The price of stone per ton can vary widely depending on the type of stone being purchased, its quality, and location. On average, prices can range from $15 to $200 per ton for common stones like gravel, limestone, or granite. Specialty stones or rare rocks can cost significantly more.
