The cost of a ton of CA6 gravel typically ranges from $15 to $30, depending on factors such as location, supplier, and market demand. Additional costs may apply for delivery and any necessary equipment for installation. It's advisable to check with local suppliers for the most accurate pricing in your area.
The number of wheelbarrows in a ton of gravel can vary based on the size of the wheelbarrow and the density of the gravel. A standard wheelbarrow typically holds about 6 cubic feet, and a ton of gravel is approximately 20 cubic feet. Therefore, you would need about 3 to 4 wheelbarrows to transport a ton of gravel, depending on how full each wheelbarrow is loaded.
The labor required to spread a ton of gravel depends on several factors, including the area size, the method of spreading, and the terrain conditions. Typically, a skilled worker can spread about 1 ton of gravel in 1 to 2 hours using a shovel and rake, while mechanical methods like a skid steer or tractor can significantly reduce this time to around 20-30 minutes. Additionally, uneven terrain or obstacles may increase the labor time. Planning and preparation can also affect overall efficiency.
As of my last knowledge update in October 2023, the price of crusher run gravel in Tennessee typically ranges from $10 to $20 per ton, depending on factors such as location, supplier, and current market conditions. It's advisable to check with local suppliers for the most accurate and up-to-date pricing. Additionally, factors like delivery fees and quantity purchased can also affect the overall cost.
The weight of 1 cubic meter (m³) of compacted gravel typically ranges from about 1.5 to 1.7 tons, depending on the specific type of gravel and its moisture content. On average, you can estimate approximately 1.6 tons per cubic meter. It's important to consider the specific density of the gravel being used for a more accurate conversion.
4,000 Lbs 2,000 LBS/ ton
The cost of CA6 gravel per ton can vary depending on location and supplier. On average, you can expect to pay around $20 to $50 per ton for CA6 gravel. It is recommended to contact local suppliers for specific pricing information.
In the state of Florida, one ton of gravel will cost you about $9.61. However, it will vary depending on the store in which you buy the gravel.
1 ton of gravel typically weighs about 2000 pounds.
A load of gravel will vary in cost by area and company. Gravel is sold by the ton. Each different type of gravel is a different price. The price varies from $15 a ton to over $100 a ton. Delivery charges are also added if the gravel is delivered.
Well, 2.2 pounds equals one kilogram and there's 2000 pounds in a ton, therefore one ton of gravel equals 909.09 kilograms
Knowing that 1 cubic foot is pretty much equal to 100 pounds or 0.05 ton, 1 ton of gravel is around 20 cubic feet.
One ton of absolutely anything weighs one ton.
The cost to have one ton of river rock delivered and installed will cost about $140. However, if two tons are delivered, it will cost about $210.
The cost of a 16-ton tandem load of crush and run gravel typically ranges from $300 to $600, depending on factors like location, supplier pricing, and delivery charges. Prices may vary based on local market conditions and the specific type of gravel. It's advisable to contact local suppliers for precise quotes.
how much does rutile cost per ton
23.5 tons is 47,000 pounds.
That's not enough information. You need to know the width of the trench, and how much volume 1 ton of gravel is equivalent to.