0
What else can I help you with?
What capacitor size do need for a 5kva generator?
The capacitor size for a 5 kVA generator typically depends on the power factor and the specific application. A general rule of thumb is to use about 0.5 to 1 microfarad (μF) of capacitance per kVA for power factor correction. Therefore, for a 5 kVA generator, you might consider a capacitor size ranging from 2.5 μF to 5 μF. However, it's essential to consult with a professional or refer to the generator's specifications for precise requirements.
How much diesel is used in a diesel powered generator?
The amount of diesel used in a diesel-powered generator depends on several factors including the generator's power output, fuel efficiency, and the duration of operation. Diesel generators typically have a fuel consumption rate measured in liters per hour (L/h) or gallons per hour (gal/h).To determine the specific amount of diesel used, you would need to know the generator's fuel consumption rate. This information can usually be found in the generator's specifications or user manual. For example, a small diesel generator with a 5-liter/hour fuel consumption rate would use 5 liters of diesel per hour of operation.
Diesel consumption per hour 5 KVA Genset?
speculation is that it consumes about .75 ltr of diesel in an hour
Diesel Consumption per hour in a 62.5 kva dg set?
It is 7 .5 litre per hour
What KVA generator is needed to run 1 ton split?
Well, honey, a 1 ton split AC unit typically requires around 3-4 KVA of power to run smoothly. So, you better make sure you've got a generator with at least that much juice if you want to keep cool when the power goes out. Don't skimp on the power, or you'll be sweating like a sinner in church.
What capacitor do you use in your 5 kva generator?
Oh, dude, you're asking me about capacitors now? Like, I'm just a comedian, not an electrician. But hey, if you're looking for a capacitor for your 5 kVA generator, you probably want one with a capacitance rating that can handle the load and voltage requirements. Maybe check with an expert to get the right one, unless you want your generator to start spewing sparks like a Fourth of July fireworks show.
What is generator KVA size for 3 phase 415 volt 7.5 kw 10 hp 19.5 A motor?
The only relevant number is the kw. Then you just divide by the power factor to get the KVA. 0.8 is a pretty typical PF, so that would give you a KVA of about 9.4. But motors can take up to 5 times their rated current on start-up, so you need to make sure you have a generator that will handle that instantaneous current.
Fuel consumptions of dozer d50 d80 of L and T and BEML?
d--50 fuel consumption---5 lit to 8 litr's d--80 fuel consumption--6 to 15ltrs
What RPM and size generator would power an average us home?
A typical 100 amp service is comparable to a 25 KVA generator. That said, very few homes pull that much load. Most utilities size their distribution systems for a 5 KVA load per home, assuming that not all homes would pull full load at the same time. RPM is a function of the number of poles in the generator. To get 60 Hz power with a two pole generator, you need 1,800 RPM.
The total solid fuel consumption in Asia?
hm.... uh.... i think its 5 only
What is the hourly fuel consumption of a dodge diesel?
3-5 gph depending on the load.
What is fuel consumption of caterpillar D10t dozer?
The fuel consumption of a Caterpillar D10 dozer is dependent upon the work load. The dozer should consume approximately 5 gallons of fuel per hour under the average workload.
