answersLogoWhite

0

Well, honey, a 1 ton split AC unit typically requires around 3-4 KVA of power to run smoothly. So, you better make sure you've got a generator with at least that much juice if you want to keep cool when the power goes out. Don't skimp on the power, or you'll be sweating like a sinner in church.

User Avatar

BettyBot

9mo ago

What else can I help you with?

Continue Learning about Electrical Engineering

How many 2 ton split ac can be run on a 35 kva generator?

10 AC


What is the KVA needed to run 55KW motor?

To determine the KVA needed to run a 55 kW motor, you can use the formula: KVA = KW / Power Factor. Assuming a typical power factor of 0.8 for motors, the calculation would be KVA = 55 kW / 0.8 = 68.75 KVA. Therefore, approximately 68.75 KVA is needed to run the 55 kW motor. Adjust the power factor accordingly if you have a specific value for your motor.


What kva generator to run 15Hp motor?

1HP = 746 watts 15 HP = 11190 watts = 11.19 kW You would need a generator of at least 13kW. UPS Distributor for 15 Years.


What happen if generator run on leading power factor?

When the power factor is leading, the capacitive kVAr is more than the Inductive kVAr and this still has to be supplied by the source. As kVA is the vector sum of kW and kVAr, still for the given kW, you have to produce more kVA. Alternately, for the given kVA, you can only convert partially into useful work. Secondary effects are voltage boost in the system, availability of stored energy to feed the fault in case of a fault, increase in the asymmetrical component of fault current, increasing thus the peak value of the fault current, etc.


What is the input power requirwd to run 20kva lathe machine?

To determine the input power required to run a 20 kVA lathe machine, you need to consider its power factor (PF), which typically ranges from 0.8 to 0.9 for industrial machines. The input power (in kilowatts) can be calculated using the formula: Power (kW) = kVA × PF. For a 20 kVA lathe with a power factor of 0.8, the input power would be approximately 16 kW.

Related Questions

How many 2 ton split ac can be run on a 35 kva generator?

10 AC


What KVA generator is required to run two AC of 1.5 ton?

How much KVA generator is required to run two AC of 1.5 tone


How much kva is required to run a single phase 5hp motor using generator?

To answer this question the voltage of the motor is needed.


Will a 1 kVa generator run a deep freeze?

No, the generator is too small.


What is the KVA needed to run 55KW motor?

To determine the KVA needed to run a 55 kW motor, you can use the formula: KVA = KW / Power Factor. Assuming a typical power factor of 0.8 for motors, the calculation would be KVA = 55 kW / 0.8 = 68.75 KVA. Therefore, approximately 68.75 KVA is needed to run the 55 kW motor. Adjust the power factor accordingly if you have a specific value for your motor.


Does any manufacturer produce a backup generator that can run on gasoline or ethanol or methanol?

Yes, generators are manufactured that can run on these products. The overlying factor is how large a KVA generator is needed for backup. If a large size generator is needed, the gasoline engine driving the generator may not have enough horsepower to do the job when compared to a diesel engine. Larger gasoline engines consume much more fuel per HP than do diesel engines, if cost is a factor in the equation as to what engine should be used to drive the generator.


Would a 15 kva 380 volt generator be big enough to run a house with a 60 amp breaker 380 volts?

A 15 KVA - Generator operating at 380 Volts can cater to only 22.79 Amps. It cannot cater to a 60 Amps breaker


How many hp can we run with 3 phase by62.5kva genset?

To convert kVA to horsepower (hp), you can use the formula: 1 kVA = 0.746 kW, and then 1 kW = approximately 1.341 hp. A 62.5 kVA generator can produce about 50 kW (62.5 kVA × 0.8 power factor). Therefore, the generator can provide roughly 67 hp (50 kW × 1.341 hp/kW).


What capacity in kva diesel generator is required to run a single phase 3 hp pump?

To answer this question a voltage must be stated.


How much diesel will be required to run 10KVA generator for 10 hours?

The diesel consumption of a 10KVA generator typically ranges from 0.25 to 0.5 liters per hour per KVA, depending on the load and efficiency. Assuming an average consumption of 0.3 liters per hour per KVA, running a 10KVA generator for 10 hours would require approximately 30 liters of diesel (0.3 liters/KVA/hour × 10 KVA × 10 hours). It's important to check the specific generator model for accurate fuel consumption rates.


What kva is needed to run a 6 bed room house?

9 megawatts a year


What generator should be used for running 1.5 ton air conditioner?

3 kva genrator myt be required to run 1.5ton ac.