9 megawatts a year
200 amps is equal to zero kva. To answer this question a voltage is needed.
10 HP is 7.46 kW theoretically, but allowing for an 0.7 power factor the kVA goes up to 10.5 kVA. Add 20% for sundry losses and you get 12.5 kVA
It depends on the power factor. If the PF = 1, then you need 75kVA. In general, kVA needed = 75kW/PF.
To answer this question the voltage of the genset is needed.
1.035 KVA
To determine the KVA needed for a 200A panel, you can use the formula KVA = (Voltage x Amperage)/1000. Assuming a standard voltage of 120V, the KVA would be 24 KVA (120V x 200A / 1000 = 24 KVA).
200 amps is equal to zero kva. To answer this question a voltage is needed.
10 HP is 7.46 kW theoretically, but allowing for an 0.7 power factor the kVA goes up to 10.5 kVA. Add 20% for sundry losses and you get 12.5 kVA
It depends on the power factor. If the PF = 1, then you need 75kVA. In general, kVA needed = 75kW/PF.
Some more information is needed. 100% power factor for one hour and 220 volts = 22 kva. At 0.85 power factor = 22/0.85 = 25.88 kva
KVA is the abbreviation for kilo-volt-amp, or kilo-watt (volts x amps = watts) Your KVA is you amps used multiplied by 240 ( number of volts in the electrical service for your house) example: if your home draws 500 amps you are consuming you would be drawing 120,000 VA or 120 KVA. That help?
To calculate the amperage of a 40 kVA load, you will need to know the voltage. The formula is: Amps = kVA / Volts. Assuming a standard line voltage of 120V, the amperage for a 40 kVA load would be approximately 333 amps.
To answer this question the voltage of the genset is needed.
The voltage of the generator needs to be stated to give an answer.
To convert kVA to amps, you need to also know the voltage. If we assume a standard voltage of 480V, then 300 kVA would be approximately 360 amps. This is calculated by dividing the kVA by the voltage and then converting to amps using the formula: Amps = (kVA * 1000) / (1.732 * Volts) where 1.732 is the square root of 3.
1.035 KVA
To answer this question the voltage of the motor is needed.