16 degrees btdc.
8 degrees btdc
1998, 318 is fitted with a timing chain not a timing belt.
Well about .030 and .040 over is pretty good, but .060 over would probably be the most you'd want to go with a 318. If you bore it .080 or .090 over then your asking for trouble.
the timing degrees are 13 24 on the dodge 318
whats the correct timing mark for a 1990 dodge ram pickup 318
it is really a 315 and can be bored out to a 383
do you have to change a timing belt on a 93 318 is BMW
timing controlled by computer. no adjustment manually
Worn timing chain.
18436572
chains
A 318 engine bored 0.040 over refers to a Chrysler 318 cubic inch V8 engine that has been modified by increasing the diameter of its cylinder bores by 0.040 inches. This modification increases the engine's displacement slightly, typically resulting in improved performance and power output. Boring the engine allows for the installation of larger pistons, which can enhance engine efficiency and combustion characteristics. However, it is important to ensure that the engine block is still within acceptable tolerances to maintain reliability.