A 318 engine bored 0.040 over refers to a Chrysler 318 cubic inch V8 engine that has been modified by increasing the diameter of its cylinder bores by 0.040 inches. This modification increases the engine's displacement slightly, typically resulting in improved performance and power output. Boring the engine allows for the installation of larger pistons, which can enhance engine efficiency and combustion characteristics. However, it is important to ensure that the engine block is still within acceptable tolerances to maintain reliability.
Well about .030 and .040 over is pretty good, but .060 over would probably be the most you'd want to go with a 318. If you bore it .080 or .090 over then your asking for trouble.
Depends on the year. .035 or .040 in
16 degrees btdc.
.040 inch
.040 inch
The metric equivalent of the 318 engine is approximately a 5.2 liter engine.
it is really a 315 and can be bored out to a 383
best way to pull an engine 318 bmw
The Dodge 318 is a 8 cylinder engine.The Dodge 318 is a 8 cylinder engine.
It would probably be close to a 340 as the 340 is the same engine block as the 318. The stock 318ci has a 3.910 in. bore with a 3.31 in. stroke the very same stroke as a 340ci. The stock 340ci has a 4.04 in. bore. The .060 in. over bore would result in a 328ci engine. The formula for this is, 1/2 bore x 1/2 bore x 3.14 x stroke x number of cylinders.
Mopar Magnum 318 CID
The size is different. The 360 engine is a 5.9 liter engine and a 318 is a 5.2 liter engine.