0
What else can I help you with?
What is the Tire pressure for 1990 yz125?
12-14 psi
What is the recomended tire pressure for 23x10.5-12 tires?
The recommended tire pressure is determined by the car maker and is on the sticker on the d/s door jam. But "The Max" recommended pressure for any tire is printed on the sidewall.
What is the tire pressure of a lawnmower?
42" Cut Riding Mowers call for around 12 to 14 psi.
Rear tire pressure Honda cr 250?
12-14 psi depending on terrain and rider weight.
What is the proper tire pressure for a 2004 Yamaha TTR 250?
The proper tire pressure for a 2004 Yamaha TTR 250 can vary depending on factors such as rider weight, riding conditions, and personal preference. However, a general guideline is to maintain a tire pressure of around 15-18 psi for the front tire and 18-20 psi for the rear tire. It is important to consult the owner's manual for specific recommendations and adjust the tire pressure accordingly for optimal performance and safety.
What is the recommended tire pressure for 23x10.5-12 tires?
The original Goodyear 23x10.50x12 turf tires on my Bolens 1256 indicate the tire pressure should not exceed 10 p.s.i., according to the information on the sidewall. That said, these are tractor tires, and not street legal or trailer tires.
How much does the average Clio Sport car cost?
That depends on the year of the Clio Sport car. A brand new Clio Sports car can cost around 12 thousand British pounds or more. So someone might have to pay between 12 or 15 thousand British pounds.
What kind of battery does a Wedgwood Clio mantle clock use?
12 volt
What does 22x12x9 mean on my ATV tire?
Inch size is the most widely used measurement in ATV tires, lawn tires, some older motorcycle tires and automotive tires. For the ATV tire size 22x12x9: 22 = The overall height of the tire when mounted and inflated to recommended air pressure. In this example, the tire is 22 inches tall. 12 = The overall width of the tire when mounted and inflated to recommended air pressure. In this example, the tire is 8 inches wide. 9 = The diameter of the wheel that this tire will mount to. In this case it will be a 9 inch diameter wheel.
What is the tire pressure on a Honda CR 125 dirt bike 1998 rear tire?
The recommended tire pressure for a 1998 Honda CR125 dirt bike's rear tire typically ranges from 12 to 14 psi, depending on the rider's weight and riding conditions. It's important to check the owner's manual or consult the tire manufacturer's specifications for the most accurate information. Always ensure that the tires are properly inflated before riding for optimal performance and safety.
What are the ratings and certificates for Cabin Pressure - 2002 TV?
Cabin Pressure - 2002 TV is rated/received certificates of: Australia:M Germany:16 Iceland:12 Italy:T Netherlands:12 Netherlands:16 (video rating) Singapore:PG Spain:13 (video premiere) UK:15 USA:R
What do the numbers mean for an ATV tire size?
Inch size is the most widely used measurement in ATV tires, lawn tires, some older motorcycle tires and automotive tires. The example below is an ATV tire size 25x8-12 or 25x8.00-12.25 = The overall height of the tire when mounted and inflated to recommended air pressure. In this example, the tire is 25 inches tall.8 = The overall width of the tire when mounted and inflated to recommended air pressure. In this example, the tire is 8 inches wide.12 = The diameter of the wheel that this tire will mount to. In this case it will be a 12 inch diameter wheel.Also, if this size said 25x8R12 the "R" would indicate that the tire is of radial construction. Converted to metric scale, 25x8R12 looks like this: 205/80R12205 = The width of the tire in millimeters when mounted and inflated to recommended air pressure. In this case it's 205mm wide. Divide this by 25.4 to convert to inches. The result is 8.07. This rounds off to 8 inches.80 = The aspect ratio to the width of the tire when mounted and inflated to recommended air pressure. This specifies the sidewall height. In this case it's 80% of 205mm, which is 164. To convert the sidewall height to an overall diameter you must multiply that by 2 (which results in 328mm), then divide by 25.4 to convert to inches (which equals 12.913) and is then added to the wheel diameter (in this case, 12 inches). The result is 24.913 inches, which rounds off to 25 inches.R = Radial construction.12 = The diameter of the wheel that this tire will mount to. In this case it will be a 12 inch diameter wheel.Load index and pressure codesThe number in the service description is the load index. This is the weight the tire is capable of handling when properly inflated. Most manufacturers will also spell out on the sidewall what that maximum load is so there is no guessing-you'll usually find it listed with the tire's maximum air pressure.Besides under inflation, one of the biggest mistakes people make with their tires is to overfill them past the maximum level indicated on the sidewall. This leads to poor handling and premature wear. And be sure to measure pressure when the tire is cold. Measuring hot will skew the numbers.Born on date and tire wear indicatorsAnother useful piece information on a tire's sidewall is its manufacturing date. Look on the side for a raised block with four digits; it's usually next to the U.S. DOT tire identification number. The first two indicate the week of its manufacture, and the last two are for the year. For example, 1702 would indicate the tire was manufactured in April, 2002 or the 17th week of 2002. Prior to 2000, there were only three digits, with the last one indicating the year.Some tires may have raised triangles, or the letters TWI, to show where the tire wear indicators are in the tread. When these marks are equal to the tread, it's time for new tires.
