answersLogoWhite

0

You should be able to find this on MSDS

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How long does it take to pour concrete for a typical driveway project?

The time it takes to pour concrete for a typical driveway project can vary depending on the size and complexity of the project. On average, it may take 1-3 days to pour and finish the concrete for a standard driveway.


Define pour point?

The definition of pour point is the lowest temperature at which a liquid begins to turn into a solid, so much so that it can no longer flow.


What is the freezing point of hydraulic oil?

The "Pour Point" of engine oil is about -44ºF.


Application of pour point?

At a defined temperature a liquid become semisolid and doesn't easily flow: this is the pour point. This is important to establish the temperature range in which this material can be used.


Why do you inject pour point depressant into fuel oil and what is its chemical name?

The pour point is the lowest temperature at which the fuel will flow. Pour point depressant will allow fuel to be used at a lower temperature without problems. Fuel oil must be pumped before it is used and if the viscosity is too high the oil will not flow easily. Pour point depressant might also allow fuel oil to be stored at a lower temperature thus saving some energy that would normally be used to keep it above its pour point. The chemical names of fuel additives are often proprietary and kept a secret, however see the related links for a discussion of pour point depressants.


What is significance of pour point test?

The pour point test determines the lowest temperature at which a substance will flow or be able to flow. This is important for understanding how a substance will behave in cold temperatures, such as in transportation and storage of petroleum products. Knowing the pour point helps prevent issues such as pipeline blockages or difficulties in starting engines in cold climates.


Rusty Pickins a gold miner has just found a chunk of gold. Rusty would like to change the gold from a solid to a liquid so that he can pour it into bars.?

Rusty can change the gold from a solid to a liquid by heating it to its melting point, which is around 1,064 degrees Celsius (1,947 degrees Fahrenheit). Once the gold has reached its melting point, it will turn into a liquid state and he can then pour it into bars or any desired mold for shaping.


How can I make frothed coffee at home?

To make frothed coffee at home, you can use a milk frother or a handheld frother to froth milk separately and then pour it over your brewed coffee. Alternatively, you can froth the milk directly in a saucepan on the stove by heating it and whisking vigorously until frothy.


What is the pour point of lubricating oil?

It varies with the oils viscosity.


How to install in-floor heating in concrete?

To install in-floor heating in concrete, first, lay down insulation to prevent heat loss. Next, place heating cables or mats on top of the insulation. Then, pour concrete over the heating elements and let it cure. Finally, connect the heating system to a thermostat for control.


What use is the knowledge of a lubricant pour point?

At a defined temperature a lubricant become semisolid and doesn't easily flow: this is the pour point. This is important to establish the temperature range in which this lubricant can be used.


What is meant by flash point and pour point?

Flash point is the temperature at which a combustible material begins to give off enough vapors that it can be ignited with a spark. Pour point is the temperature at which a viscous fluid will flow easily, primarily used to indicate the ability to pump the fluid.