For an 84 Z28 Camaro, the typical backspacing is around 4.5 to 5 inches, depending on the wheel size and design. The offset generally ranges from 0 to +25 mm, but it's essential to check specific wheel and tire combinations to ensure proper fitment and clearance. Always consider suspension modifications or changes in tire size, as they can affect these measurements.
check the smog pump ,,,i had the same problem on my 95 z28
in the hub
The wheel spacing itself will correct, or increase, the offset and properly push the wheel out. The spacers can also be change out to provide a better spacing and offset.
4le60
No. OBD1 = CPS.
I believe it was obd1.
of course
34-45 offset
Power steering pump/fluid maybe
The low side port for the air conditioner on a 95 Camaro Z28 is located above the condenser. It is the smaller of the hoses next to the firewall.
Is the estimated tuck in or out from the center of the wheel, example: (nissan sentra) 18x7.5 +40 offset is tucking in 40 mm from the center of the wheel or (old chevy pickup) 15x7.0 -10 offset is sticking out 10 mm from the center of the wheel.