See if the holes in the metal grid are blocked so that the flames can not come up.
To turn on a gas fireplace using a wall switch, first locate the switch on the wall near the fireplace. Flip the switch to the "on" position. Then, press and hold the ignition button on the fireplace until the pilot light ignites. Finally, release the button and adjust the flame height as needed using the wall switch.
the pilot light in my fireplace is working but when i turn the switch on (new switch) it wouldn't fire up
SWITCH
The light switch may feel hot due to the flow of electricity through it, which can cause the switch to generate heat.
Yes, a faulty light switch can cause lights to flicker or not turn on properly.
check brake light switch
No, it is not safe to touch a hot light switch as it could cause burns or electric shock.
Yes, the pilot light should always be on in a gas fireplace to ensure that the fireplace can ignite quickly and efficiently when needed.
If the fuel pump relay switch is bad then the fuel pump will not be turned on. Think of the relay like a light switch. If the switch has a bad connection then the light doesnt work.
Switch to a light source with a shorter wavelength.... Switch to a light source with a higher frequency
The light switch may feel warm because of the flow of electricity through it, which can cause some heat to be generated.
Probably a bad headlight switch. Also may be the power feed wire for the headlight switch. Check both.