0
What else can I help you with?
Is it bad for the car engine if you change third gear to second gear in 30mph?
If would not be bad for a car engine to shift from third to second gear if you are traveling at 30mph.
Why wont your 2000 Hyundai sonata shift past second gear and then the check engine light comes on?
Have someone read the codes set. Many auto parts stores will do this for you. The codes will give you a clue as to what the problem is.
What problem of Isuzu 4BA1 engine the manual trnsmission noisy in second gear only?
a noisy second gear in your transmission is that your second gear might have broken gear tooth which is mostly the problem with my cars.either the second gear on the counter gear or the second gear itself.
Why cant you go from third gear to second gear?
The engine will over-rev depending on what size engine you have
Engine noise between first and second gear?
turn the engine off
Shift from first to second gear?
When shifting from first to second gear in a manual transmission vehicle, you need to press the clutch pedal to disengage the engine from the transmission. Then, while keeping the clutch pedal depressed, move the gear shifter from first gear to second gear. Finally, release the clutch pedal slowly while simultaneously pressing the gas pedal to smoothly engage the engine with the transmission in second gear.
My 1996 town car won't go in gear and my abs light comes obn?
my 96 lincolntown car wont go in gear and the abs system light comes on
What does it mean when grand prix reads second gear start?
There is a switch on the dash or shift console that turns this feature on and off. When it is on, the light on the dash comes on, and the transmission leaves out first gear, starting in second from a dead stop. This is great for icy winter conditions.
Can steering gear box cause check engine light?
No
Second gear start light?
It tells you your second gear start switch is on. When on, that switch makes the transmission not use first gear. This is good for icy winter conditions.
Your 96 intrepid wont shift out of second gear and engine light stays on?
You need to have the engine and trans checked for codes. The trans computer defaults to 2nd gear when it detects a problem and sets a code. You could have anything from a sensor failure to a major internal failure.
Why automatic transmission stuck in 2nd gear check engine light on.?
You need to have the system checked for codes. The computer that controls the trans has most likely detected a problem and set a code. That can cause the trans to be locked into second gear.
