0
This question is too specific as roads would be less expensive than a drive because of the quantity. However assuming the question was based on a driveway it should be about $.85 to 1.25 per square foot. Once the base coat on your driveway has been applied it is best to give it time to set up perhaps 6 months or longer if possible. This is because a new driveway is likely to develop small pockets and sink holes due to settling and water flow changes. Although a driveway can be repaired when this happens it never looks the same as if it were done at the same time.
What else can I help you with?
What is the cost of top coat asphalt per sqft for roads?
The cost of top coat asphalt for roads typically ranges from $1.50 to $3.50 per square foot, depending on factors like location, project size, and asphalt quality. Additional costs may arise from preparation work, labor, and any required permits. It's advisable to obtain quotes from local contractors for a more accurate estimate based on specific project needs.
What is top coat paving?
Top coat paving refers to the final layer applied to a paved surface, typically asphalt or concrete, to enhance durability, aesthetics, and performance. This layer helps protect the underlying materials from weathering, traffic wear, and other environmental factors. It can also provide a smoother finish and improve skid resistance, making the surface safer for vehicles and pedestrians. Top coat paving is often used in roadways, parking lots, and driveways.
How thick should hot mix asphalt top coat be?
The thickness of a hot mix asphalt top coat typically ranges from 1.5 to 3 inches, depending on the intended use and traffic load of the surface. For residential driveways, a thickness of about 1.5 to 2 inches is often sufficient, while commercial applications or roads may require a thickness of 2 to 3 inches to ensure durability and performance. Proper compaction during installation is also crucial to achieve the desired thickness and longevity.
Can base coats work as top coats?
top coat and base coat are basically the same just the top coat is shinier so it should be OK.
Is top coat singular or plural?
Top coat is singular. The plural form is top coats.
Where can one purchase a top coat?
There are many places where one can purchase a top coat. One can purchase a top coat at popular stores such as Jos A. Bank, Burberry, J. Crew, and Lands' End.
What would happen if you dont use the base coat or top coat in correct order?
Ïf you don't use base coat the top might either not stick properly, or it might not cover properly. If you put the base coat on the top coat you won't get the gloss and maybe not even the color that you intended.
The moon has an average albedo similar to asphalt and black top?
The moon's average albedo is about 0.12, which is lower than that of asphalt and black top surfaces. This means the moon reflects less light compared to those surfaces, which is why it appears dim in the sky.
What can you put on top of a crushed concrete driveway?
Pea gravel, crushed granite or asphalt.
What is the best top coat to use with gel stain for optimal results?
The best top coat to use with gel stain for optimal results is a clear polyurethane top coat. It provides a durable and protective finish that enhances the appearance of the stained surface.
Running track repair cost?
depends on where track is , how many meters2, track system you have= spray top, flow coat or Mondo. price at white-line-services.com
Do you need to put clear coat over gloss white top coat?
If it is single stage paint then no if base coat then yes....
