answersLogoWhite

0

Found on 'Motorhome facts' forum

From interpretation of the handbook (which admittedly is not straightforward)

CFG1/2/3 select the service interval. 18,600, 12,500 or 9,300 miles respectively (can be set for different usage patterns for different models).

Once you've got the CFGn displayed, a quick push on the button switches between them, but once you've got the one you want, hold the button down (it says at least 5 seconds).

This should reset the service interval to the required mileage, and reset the service indicator.

I assume you have had the service indicator switch on due to mileage? The spanner symbol on mine always displays as a test on switch on. When a service is due, I additionally expect a countdown to appear and not disappear until the config above is done.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you reset service indicator for chery j3?

J3 chery how do you reset service spanner


How do you reset service light on a fiat ducato C?

To reset the service light on a Fiat Ducato C, first turn on the ignition without starting the engine. Press the accelerator pedal three times within 10 seconds. After that, turn off the ignition and then start the engine; the service light should be reset. If the light remains on, you may need to consult the vehicle's manual or visit a service center.


Why does the spanner symbol stay on on a vauxhall astra bertone 2002 model?

The spanner comes up to indicate that the car is due for a service. It should be reset by the garage after the service is carried out.


How do you reset service spanner sign on a 03 vauxhall vectra 2.0 dti?

To reset the service spanner indicator on a 2003 Vauxhall Vectra 2.0 DTI, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal fully three times within five seconds. Then turn off the ignition. Upon restarting the vehicle, the service spanner light should be reset.


How do you turn off the service spanner on a berlingo?

To turn off the service spanner light on a Citroën Berlingo, you typically need to reset the service indicator through the vehicle's dashboard. Turn the ignition on without starting the engine, then press the trip reset button until the service spanner icon starts flashing. Finally, keep holding the button until the icon goes off, indicating that the reset is complete. If the light persists, consult the vehicle's manual or a professional for further assistance.


What is the warning spanner light on the opel zafira and how do you fix it?

Car due a service? It will need to be reset by a main dealer


Reset service spanner on diesel laguna 04 plate?

Turn on the ignition but do not start the car, press the button on the end of the wiper arm until the "miles to next service" is displayed on the odometer. Then press and hold the trip reset button until the display resets to 18000. This should also turn out the service and stop light. Turn off the ignition then restart the car.still light is on


How reset a spanner of a polo vivo?

To reset the spanner light on a Polo Vivo, first turn on the ignition without starting the engine. Press the gas pedal fully three times within 10 seconds. After that, turn off the ignition. The spanner light should reset, indicating that the service reminder has been cleared. If it doesn’t reset, consult your vehicle's manual or a professional mechanic for further assistance.


Vauxhall astra 2.0 dti spanner light?

this means that's its due a service , if you press and hold the odometer (trip) button on your dash then turn ignition on you should get a countdown from 10 to 0 then the service light will be reset, and............... the spanner has gone!!!!!


What does a spanner mean on dashboard citroen c8?

Its the service warning light. If you are due your sevice it illuminates. If, however you have just had the service then the mechanic failed to reset the service feature through the dashboard.


How do you Reset spanner on Renault laguna?

you have to press in the button on the end of the wiper switch until you reach the spanner symble with only the ignition on and the car not running then hold for several seconds until it flashes and disapears but this spanner is telling you the car needs a service. Depends which model?


How do you reset Service light SEAT Altea?

If the service light is in the shape if a spanner then I presume it is like the 2008 model. In which case press and hold the trip button "0.0" before inserting the key. Insert ignition key while holding down the trip button and turn on ignition without starting car. Release the trip button and the service light spanner will cease to flash. Now turn the trip button to the right (clockwise) and it will reset. Service light (spanner) should disappear and only return when the next service is due!