0
Changing balljoint on this car is a pain in the butt! You mite what to take it to shop. But if you what to try this. First you disconnect the balljoint from the hub. -18mm nut (I beleive) This is the hardest part- removing the rivits that hold the joints to the control arms. The eaisest way that I found is to drill the rivits halfway thought, them knouck off the rivet heads with a chisel- I use a air Hammer with a chisel tip. Then drive out the rest of the rivit with a straight dit in the air hammer. Once all the rivits- (WoW that yes work) you can remove the old balljoint. Almost all after market (I have found) the mounting bolts always are bigger then the holes in the control arms, Just rim out the holes with a file or die grinder. Know just reassemble in reverse order. Good Luck!! Cordobaman GOD BLESS OUR TROOPS
What else can I help you with?
How do i change both lower ball joints on a Chevy lumina?
take old ones out... put new ones in
How do you change lower ball joints on a 1994 lumina?
Drive it to the local garage and pay to have it done.
How do I replace lower ball joints on 1999 Chevy lumina?
Remove the tire and wheel from your 1999 Chevy Lumina. Remove the nut on the top of the ball joint. Pound the ball joint out with a hammer. Reverse the process to install the new ball joint.
How do you change the lower ball joints on an Envoy 2004?
How do you change the lower ball joints on an 2004 envoy
How do you drain your radiator for a 99 Chevy Lumina?
i just disconnected the lower hose
How do you replace the front wheel hub on a 1999 Lumina?
The front wheel hub on a 1999 Chevy Lumina is connected to several suspension components. Loosen and remove all the components including the lower and upper ball joints. Pull off the hub assembly and install the replacement.
Where can you get a picture of where lower raditor hose goes on 1995 Chevy lumina?
You can get that picture from google.com.
Where is the starter in a 1994 Chevy Lumina?
6 cyl.? Look at the lower rear end of the engine.
Cost of replacing an intake manifold on 1999 Chevy lumina?
upper or lower? if it's lower you can bet on paying upwards of 400$
How do you change upper and lower ball joints 96 cirrus?
You change the control arms, upper and lower. The ball joints are manufactured into the control arms.
How do you change upper and lower ball joints on a 1997 Ford Explorer?
How to change upper and lower ball joints on a 1997 ford explorer all wheel drive?
How do you change the lower ball joints on a 1998 mark viii?
You have to change the whole lower control arm.
