take right side motor mount loose and jack motor up to get starter off.
if it is an automatic transmission it is a real nitemare. you have to remove the two transmission coolent lines from the radiator, then you have to slide the starter out through the front of the motor, in between the motor mount and the engine, it will only fit if you get it just right.
how do you remove the automatic transmission from the 2004 wrx.... i have everything disconnected except for the gearing fork shifter.
remove neg. battery cable disconnect both electrical wires to starter solenoid. remove 2 14mm bolts that secure starter to transmission and remove starter
No. You can remove the engine and leave the transmission in the vehicle.
transmission
Is this a standard transmission, or an automatic? automatic
Disconnect the battery. On the drivers side of transmission bell housing you will see the starter. remove the power and control wires from the starter. Remove the 2 bolts that hold it to the transmission.
Does it have an automatic or standard transmission? That is the first question..
Start by disconnecting battery . Remove flywheel cover on transmission .Remove 2 bolts holding starter to block. Slide starter back and drop down to remove wires from starter.
Instructions on how to remove a 1994 B4000 Mazda 4 wheel drive transmission
Remove the driveshafts.
Remove the positive battery cable from your 2001 Nissan battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.