0
Step 1 remove glove box, 6 screws on the hing, compress glove box slightly so inner track wheels are out of slots and remove.
Step 2 go to Google images and type blower motor for a 2003 or what ever year your Grand Prix is and you will find a good diagram of what you are looking for, as well you will see a picture of what the blower resister looks like.
Step 3 Now that you know what you are looking at remove the three small screws using a 6mm socket. Now the blower can be lowered and unplugged
Step 4 Look at the google image of the resister and locate directly behind the blower against the fire wall, unplug wiring leading into it. Time to remove the mounting screws, there are three screws but only two are visible. remove the two you can see and ease the resistor out the third screw hole is slotted so it does not need to be removed.
Step 5 install new resistor and plug all the wiring back in, reinstall blower and glove box. GOOD TO BLOW :)
Please note: The resistor screws are are a little tough to get to but if you use a 5.5 mm open ended wrench it is easiest.
What else can I help you with?
How do you Replace blower motor resistor 2004 mercury grand marquis?
Take it to a repair shop.
How do you replace blower motor resistor 2003 grand prix?
To replace the blower motor resistor in a 2003 Grand Prix, first ensure the vehicle is off and disconnect the negative battery terminal. Then, locate the blower motor resistor, which is typically found under the dashboard on the passenger side, near the blower motor. Remove the screws or clips securing the resistor, disconnect the wiring harness, and pull out the old resistor. Install the new resistor by reversing these steps, ensuring a secure connection before reconnecting the battery.
Where is the blower motor resistor located on 2006 Pontiac Grand Prix?
Resistor is located behind the blower motor assembly.
Heater fan switch works only on the highest setting?
The blower motor speed resistor is burned out. You can replace only the resistor but the resistor probably burned out because the blower motor is going bad. If you want to fix it for good, replace both the blower motor and blower motor speed resistor.
If the blower stopped working my 2001 Kia Spectra could this be the motor blower resistor or should I replace the blower motor?
Check to see if you are getting power to blower motor - if so replace blower motor If not check fuse, switch, resistor pack.
Where is the blower motor resistor on 1998 Plymouth grand voyager?
the resistor is gonna be right off the blower motor attached to the blower motor by a wire harness should be by the heater core
How can you figure out which to replace the blower motor or blower motor resistor on a 1994 Nissan altima?
Check to see if you have 12 volts at the blower motor. If yes then the blower motor is bad. If no, then the resistor, relay, or fuse is bad.
How do you stop the blower motor in a 1995 jeep grand Cherokee from running when the car is turned off?
Replace the blower motor resistor block. It is located under the dash on the passenger side.
How do you change the blower motor resistor on a 2000 Pontiac grand am?
Please email me a photo of where the blower motor resistor is and how to change it. Thanks, Michael. By the way I want it for a 2000 Sunfire not a Grand Am.
How do you change 2001 grand am blower motor resistor?
How_do_you_replace_a_blower_motor_resistor_in_a_2000_Grand_Am_GT
How do you replace the blower motor resistor in a 2001 villager?
To replace a blower motor on the resistor first you take off the nozzle and then you go into the motor through the nozzle and unlock it then repeat and oil and done.
Why does the heater on a 1998 Pontiac grand prix only work on high?
The blower motor resistor circuit board has gone bad. Replace the blower motor resistor. I did Still dont work Try the fuses...Had the same problem and it was a blown fuse.
