I have a 1996 D R and have the same problem. Apparently the flasher switch needs to be replaced.
If the directionals are not working at all on a 1996 Dodge Stratus, it could be due to a blown fuse, a faulty flasher relay, a broken switch, or a wiring issue. We recommend checking these components first to diagnose and resolve the issue.
On a 1996 Dodge Intrepid, the flasher button is located near the center back of the steering wheel, you should see the button on the top of the steering column. The flasher itself is mounted to the multi purpose fuse panel.
To replace the turn signal switch of a 1996 Dodge Caravan, open the engine's hood to access the front turn signal bulbs. Then take the headlight assembly a little off the front to give room to get the bulbs. Remove the old turn signal switch and slip the new one in place.
You can't, you have to replace the ignition switch
No, a 1996 Ram does not have an inertia switch.
gfl
To replace the flasher on a 1996 Infiniti I30, first locate the flasher relay, which is typically found in the fuse box under the dashboard on the driver's side. Remove the fuse box cover and identify the flasher relay, which is often marked. Gently pull the old relay out and replace it with the new one, ensuring it’s securely in place. Finally, test the turn signals to confirm that the new flasher is functioning properly.
Dodge does not use inertia/reset switches.
No
No.
Dodge does not use inertia/reset switches.