You enter more than 10 times wrong code. Radio is locked.
Chiken little
Error... I guess...
probably anti theft - need code to reset
IF you mean 'what DOES display mean' - display means 'show'
DISP on a radio typically stands for "Display." It refers to a function or button that allows users to toggle between different display options or view additional information on the radio's screen, such as frequency, signal strength, or current settings. This feature enhances user experience by providing relevant data at a glance.
the power has been disconnected for too long of a time and the security system on your radio was activated. look in your owner's manual for a keycode to unlock it.
If u mean steering wheel controls you need a patch lead .
If you mean to insert the RADIO CODE: - the battery (on the car) must be charged or new; - insert the key in the ignition and turn it on the first level; - push the button ON/OFF of the radio; - you will have 4 lines on the display; - learn the code from the label you got together with the car's documents; - push the buttons located under each line of the display, so many time until you get the requested number; - after you have the 4 numbers on the display push the arrow "right" and the radio will start normally.
If you mean to insert the RADIO CODE: - the battery (on the car) must be charged or new; - insert the key in the ignition and turn it on the first level; - push the button ON/OFF of the radio; - you will have 4 lines on the display; - learn the code from the label you got together with the car's documents; - push the buttons located under each line of the display, so many time until you get the requested number; - after you have the 4 numbers on the display push the arrow "right" and the radio will start normally.
The eco mode that comes up on your radio display basically stops your battery going flat if you leave your radio on for a long period of time,whilst the engine is not running.
nothing to display
if the radio display is compromised.... the radio is toast. look for display abnormalities.... that's the sign. never replace w/ factory... 2x the price 1/2 the quality If you aren't receiving any "radio" signals it could mean that the antenna wire in the back of the radio unit is either loose, cut/broken, or has a short somewhere. You may also want to check the radio fuse to rule that out as well, but my guess is the antenna lead.