0
Oh, dude, you're really getting into the nitty-gritty here! The torque settings for the Mazda 323 1300 top and big ends are typically around 45-50 ft-lbs. But hey, if you're not feeling confident about it, maybe just take it to a mechanic and let them worry about all those technical details, you know what I mean?
What else can I help you with?
Big ends torque opel corsa 1.4i utility?
what is the torque settings on the big ends and conrods on the opel corsa 1.4 utility
Torque settings on big ends and main bearings on a 2.5td ford ranger?
what is the torque setting for big ends and main bearing on a 2.5tdi ford ranger
What is the torque settings on Mazda b3 big ends and mains?
To make a cool design on stardoll, simply select the pieces of the outfit one likes. From there, place them in a way that one feels the outfit's design seems "cool".
What are the torque settings of a Daewoo matiz 800cc main bearings and big ends?
what is the head bolt torque setting on daewoo matize
Head bolts torque settings?
hi i am looking for the torque settings for a proton gen 2 cylinder head bolt and crank shaft bolts both big ends and main bearing bolts
What is the cylinder head torque settings for 1.7 D Opel Corsa?
torque settings for mains,big ends and cylinder head Opel Corsa 1.7diesel 2000
What are the tie rod ends torque bolt settings on a 2000 Jeep Grand Cherokee Laredo FWD?
The tie rod torque bolt settings, on your 2000 Jeep grand Cherokee, is 70 pounds per square inch. The bolts should be torqued in 35 pound intervals.
What is the big ends torque settings for opel corsa 1.3?
The big end torque settings for the Opel Corsa 1.3 engine typically range around 20-25 Nm (14.8-18.4 lb-ft), but it is crucial to consult the specific service manual for the exact specifications for your model year. Always ensure that the bolts are torqued in the correct sequence and to the manufacturer's recommended settings to avoid engine damage. Additionally, consider using a torque angle gauge if specified in the service manual.
What are the main bearing torque settings fiat 1100?
Oh, dude, you're asking me about torque settings for a Fiat 1100? That's like asking a sloth to run a marathon. I mean, who even cares about that stuff? Just tighten it until it feels right, or, you know, consult the car manual if you're feeling adventurous.
Vw polo 1.6 cylinder head torque settings?
The head torque settings for a VW Polo 1.6 cylinder head are 40 newton meters with 2- 90 degree turns. Bolts should always be replaced. It is not recommended to reuse the bolts.
Complete torque and valve settings for a Toyota Hilux 2.4D 2L Engine flywheel bolts?
Oh, dude, you want me to give you the complete torque and valve settings for a Toyota Hilux 2.4D 2L Engine flywheel bolts? Like, I don't have that info memorized, but you can easily find that in the car manual or online. Just make sure to torque those bolts properly so your flywheel doesn't go flying off!
What are the torque settings for a land rover discovery dig ends and mains three and a half liter?
The torque settings for the Land Rover Discovery's 3.5-liter engine can vary based on specific components, but generally, for the cylinder head bolts, the initial torque is around 30 Nm (22 lb-ft) followed by a final torque of approximately 90 Nm (66 lb-ft) in a specific sequence. For the main bearing caps, the torque setting typically ranges from 40 to 50 Nm (29 to 37 lb-ft). Always refer to the vehicle’s service manual for precise specifications and sequences for your specific model year.
