In the 1994 Oldsmobile Regency 98, the engine control module (ECM) is typically located under the dashboard on the driver's side, near the steering column. It may be mounted on the firewall or behind the glove compartment. To access it, you may need to remove some panels or components for better visibility. Always refer to a repair manual for specific instructions related to your vehicle.
On a 1990 Oldsmobile Regency 98, the ignition control module is typically located on the front of the engine, near the ignition coil. It is often mounted on the intake manifold or the engine block. To access it, you may need to remove any covers or components blocking the area. Always consult the vehicle's service manual for precise location details and safety instructions.
On a 1984 Oldsmobile Regency, the starter is located on the passenger side of the engine, near the bottom, where the engine and transmission meet. It is mounted to the bell housing and connected to the battery and ignition system. To access it, you may need to lift the vehicle and remove any components that obstruct its view.
Check the fuel pump
On a 1988 Oldsmobile 98 Regency Brougham with a 3.8 liter V6 engine, the ignition control module is typically located on the side of the engine block, near the distributor. It may be mounted on a bracket or directly on the engine itself. To access it, you might need to remove some components, such as the air cleaner or other nearby parts for better visibility. Always refer to the vehicle's service manual for specific details and diagrams.
The Ignition Control Module is on the top left hand side of the engine under the Ignition Coils.
On a 1997 Oldsmobile Regency, the thermostat is typically located near the engine, specifically on the engine's coolant outlet housing, which is situated at the top of the engine block. To access it, you may need to remove the upper radiator hose and the housing cover. It's advisable to refer to the vehicle's service manual for precise instructions and safety precautions when replacing the thermostat.
where would the spark plugs at on a Oldsmobile 1989 engine
The knock sensor on a 1995 Oldsmobile Regency 98 with a 3800 engine is typically located on the engine block, specifically on the lower part of the engine, near the oil pan. It is positioned on the driver's side, towards the rear of the engine. To access it, you may need to remove some components for better visibility and ease of reach. Always refer to a service manual for precise location and removal instructions.
The thermostat on a 1989 Oldsmobile 98 Regency is located in the engine compartment, specifically at the end of the upper radiator hose where it connects to the engine. To access it, you'll need to remove the upper radiator hose and the thermostat housing, which is typically secured by bolts. Make sure the engine is cool before attempting to replace the thermostat to avoid burns.
that would be 5.7 Liter
On a 1994 Oldsmobile 98 Regency, the fuel pressure regulator is typically located on the fuel rail, which is mounted on the engine. It is usually near the intake manifold and can be identified by the vacuum line connected to it. Accessing it may require removing some engine covers or components for better visibility. Always refer to a service manual for specific details and procedures.
On a 1991 Oldsmobile Regency 98, the blower relay is typically located in the engine compartment fuse box. You may also find it mounted on or near the firewall. Consult the vehicle's owner's manual for a specific diagram or more detailed information regarding the exact location.