answersLogoWhite

0

In a 1993 Acura Legend, the OBD-I port is located beneath the dashboard on the driver's side. Specifically, you can find it near the fuse box, typically above the brake pedal. The connector may be covered by a plastic panel that can be removed for access.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Related Questions

Where is the obd plug on a 1993 Acura Legend?

Where is the obd1 plugin on a 1993 acura legend


Where is the OBD1 port located on a 1992 Acura Legend?

obd not available until 1996


Where is the obd2 plug for Acura legend?

Acura Legends do not have obd2 plugs. They are all OBD1.


Where is the obd1 connector for 1991 Acura Legend?

standing in front of the car on the left hand side by the engine it should be grey, remove the cap and plug in the obd1 reader. hope this helps.


Where is the obd1 plug for Acura Legend 1995 model?

The OBD-I plug for the 1995 Acura Legend is located under the dashboard, near the driver's side. Specifically, you can find it above the brake pedal and to the left, near the steering column. It may require you to bend down or look closely to spot it, as it can be somewhat hidden.


Where is an OBD1 plug to trouble shoot a 93 Acura Integra?

The OBD1 plug for a 1993 Acura Integra is typically located under the dashboard, near the driver's side. You can find it near the steering column, often attached to the lower part of the dashboard. Look for a rectangular connector with multiple pins, usually covered by a plastic cover. This is where you can connect an OBD1 scanner or jumper wire to troubleshoot the vehicle.


Is 1992 Acura Integra obd1?

YES, all vehicles prior to 1995 were OBD1.


Is The 1993 Toyota Camry An OBD1 or OBD2?

OBD1


What type of obd system does a 1995 acura integra have?

The 1995 Acura Integra is OBD1. There is no connector if you are looking for one.


Is a 1991 Acura Integra an obd0 or an obd1?

A 1991 Acura Integra is classified as OBD1 (On-Board Diagnostics version 1). This system was introduced in 1991 and continued until 1995 for most Honda and Acura models. OBD0 was used in earlier models, primarily from the late 1980s to 1990.


Where is obd1 located on 1990 240sx?

I believe they didnt put obd1 ports on till 95


What is the Obd2 drive cycle for 1993 Honda Accord?

1993 honda accord is obd1 not obd2