The OBD (On-Board Diagnostics) port for a 1992 Ford Sable is typically located under the dashboard on the driver's side, near the steering column. You may need to remove a panel or look above the brake pedal to find it. It's usually a 16-pin connector, which is standard for OBD-II systems, but keep in mind that the 1992 model may use OBD-I, which could have a different connector.
there is not a scanner port on 87 hondas, the ecu will flash the code from the led on top of the computer. dachonda
Where is the scanner port for a 2002 Dakota?
That depends on the scanner. Typically they are plugged in to either the USB port or the parallel port, depending on how the scanner is designed.
Where is the diagnostic scanner port on a 1995 F-250 4x4
The low pressure port for the 2003 sable is on the passenger side of the engine compartment. It is right at the firewall made into a hose.
I found the low pressure ac port on my 2001 sable by the passenger side firewall.
plug scanner's cord into the USB port
Reading diagnostic codes is easy. The driver plugs the reader/scanner into the diagnostic port of the vehicle, and the scanner/reader will give a code if there is a problem, and tell them the type of problem.
I/O port
Check the EGR valve. Then run a computer diagnostic test. You can usually borrow, rent or buy a code scanner from most auto parts retailers. Some will even help you connect the code scanner to the port under the dashboard.
port scanner!
Port scanner.