It will buck, choke & backfire but as long as you don't persist (shut it off right away) it should be o/k. Set the timing properly (15BTDC), firing order is 142536, # 1 cylinder is passenger rear. On any engine, the possibilities are, break a timing chain, bent a rod, backfire.
TIMING BELT for the 2.7 liter V6 engine in a 1989 Acura Legend
The 3.2 liter V6 engine in a 1995 Acura Legend has a timing BELT
Were are the timing marks on a 1991 acura legend
in front of engine must remove the timing belt covers
Check the 91 Legend for a bad knock sensor. Check the timing for proper setting, and check for any vacuum leaks.
The 1993 Acura Legend has a timing belt. For 1991-1994 model years, the manufacturer recommends that the belt be replaced every 90,000 miles or 72 months.
oxygen sensor
Timing belt diagrams for a 1989 Acura Legend are available at local auto part stores. Service repair manuals also carry them.
On a 1993 Acura Legend, the timing marks can be found on the crankshaft pulley and the timing belt cover. The crankshaft pulley has a series of notches that align with a mark on the timing belt cover, typically a raised or painted line. Additionally, the camshaft pulleys have marks that should align with the cylinder head. It's essential to ensure all these marks are correctly aligned for proper engine timing.
The 3.2 liter V6 engine in a 2006 Acura TL has a timing BELT ( P.S. it is also an interference engine )
There are 3 drive belts and the timing belt. Which are you referring to? Either way you need to get a repair manual for assistance. There are a lot of steps involved to get to the timing belt.
Interference engine