Yes, apart from the Denmark and Nepal flag.
Conditional FlagsConditional flags represent result of last arithmetic or logical instruction executed. Conditional flags are as follows:1. CF (Carry Flag)This flag indicates an overflow condition for unsigned integer arithmetic. It is also used in multiple-precision arithmetic.2. AF (Auxiliary Flag)If an operation performed in ALU generates a carry/barrow from lower nibble (i.e. D0 - D3) to upper nibble (i.e. D4 - D7), the AF flag is set i.e. carry given by D3 bit to D4 is AF flag. This is not a general-purpose flag; it is used internally by the processor to perform Binary to BCD conversion.3. PF (Parity Flag)This flag is used to indicate the parity of result. If lower order 8-bits of the result contains even number of 1's, the Parity Flag is set and for odd number of 1's, the Parity Flag is reset.4. ZF (Zero Flag)It is set; if the result of arithmetic or logical operation is zero else it is reset.5. SF (Sign Flag)6. SF (Sign Flag)In sign magnitude format the sign of number is indicated by MSB bit. If the result of operation is negative, sign flag is set.7. OF (Overflow Flag)This stands for over flow flag. It occurs when signed numbers are added or subtracted. An OF indicates that the result has exceeded the capacity of machine. It becomes set if the sign result cannot express within the number of bites.Read More: http://www.daenotes.com/electronics/digital-electronics/8086-8088-microprocessor
You can also gain some insight from the DESCRIPTION of a flag, which occasionally includes some information on symbolism, in the CIA World Factbook.
8
Byte
According to Allstar Flags, flags are by size:Garrison Flag 20 x 38 feetPost Flag 8 foot 11 3/8 inches by 17 feetField Flag 6 foot 8 inches by 12 feetStorm Flag 5 feet by 9 feet 6 inches.and Internment Flag 5 foot by 9 foot 6 incheshttp://www.allstarflags.com/facts/how-military-uses-flags/
The 8085 microprocessor has an 8-bit flag register, even though it only has 5 flags, because all of the registers in the 8085 are 8-bit or 16-bit. In fact, the flags register is considered to be part of the accumulator, as one "register pair", for purposes of stack push/pop and interrupt call/return. Be warned, however, that you should not attempt to change the state of bits stored on the stack and then pop'ing them into AF, because some of the three "unused" bits might be undocumented but actually used, or their meaning might change between different versions of the chip.
Some sites that sells flags online from sites like Flag Shop, Ultimate Flags, Buy Flags US, Flags online, Flag Discounter, Astro Flag, and Flag. Sites like Walmart and Amazon also sell flags online.
We have only one flag register of 8 bits. Bits description is as follows (Assuming D0=LSB & D7=MSB) D7=Sign Bit. D6= Zero Flag D4= Auxiliary Carry Flag D2 = Parity Flag D0= Carry Flag.
The Roman empire had no national flag. The only flags were the military banners or "vexillum" or signal flags called "signum".The Roman empire had no national flag. The only flags were the military banners or "vexillum" or signal flags called "signum".The Roman empire had no national flag. The only flags were the military banners or "vexillum" or signal flags called "signum".The Roman empire had no national flag. The only flags were the military banners or "vexillum" or signal flags called "signum".The Roman empire had no national flag. The only flags were the military banners or "vexillum" or signal flags called "signum".The Roman empire had no national flag. The only flags were the military banners or "vexillum" or signal flags called "signum".The Roman empire had no national flag. The only flags were the military banners or "vexillum" or signal flags called "signum".The Roman empire had no national flag. The only flags were the military banners or "vexillum" or signal flags called "signum".The Roman empire had no national flag. The only flags were the military banners or "vexillum" or signal flags called "signum".
The 8085 microprocessor has 5 flags: 1. Zero flag: The zero flag is set, when the ALU operation results a zero . 2. Carry flag: If an arithmetic operations results in a carry, this flag is set. 3. Parity flag: This flag is set, when an arithmetic or logical operation results in a data, which has even number of 1s. If otherwise, it is reset. 4. Sign flag: After the execution of an arithmetic or logic operations, if D7 bit of the accumulator is 1, it indicates a negative number and this flag is set. If otherwise, it is reset. 5. Auxiliary Carry flag: used for BCD Operations, During the BCD operations, if D3 bit producing the carry then the AC bit set as1, otherwise the bit is 0. 6. Carry Flag: when a carry is generated by digit D7, then the carry flag set as 1, otherwise the bit will be 0.
the plural word of flag is flags. Just add an s to the end of the word flag e.g.claw-claws BY the way HI!!
You go under ground and go wirless play with someone else,go into their secret base,go to their computer and press A on it,then a flag should appear on your head.Run to your base and click on you computer then the flag should be gone and you have stolen a flag. steal 0 flags to have a blue flag steal 1 flag to have a bronze flag steal 3 flags to have a silver flag steal 10 flags to have a gold flag steal 50 flags to have a platinum flag hope i helped (:
;assuming trap flag is the 8th bit in the flags register pushf pop ax or ax,0100h push,ax popf
sign flag parity flag zero flag
there are 5 flags of intel 8085 are: Carry flag(CY), parity flag(P), Auxiliary Carry flag(AC), Zero Flag(Z), Sign flag(S).
flags