In the 8085 microprocessor, DAD (Double Add) is an instruction that adds the contents of a specified 16-bit register pair (HL, BC, or DE) to the contents of the accumulator (A) and stores the result back in the 16-bit register pair. The flags affected by the DAD instruction are the Carry flag (CY) and the Parity flag (P). The Zero flag (Z) and Sign flag (S) remain unaffected. Additionally, the Auxiliary Carry flag (AC) is also not affected by this operation.
All flags are affected after the SUB operation to reflect the result of subtraction.
5 FLAGS
there are 5 flags of intel 8085 are: Carry flag(CY), parity flag(P), Auxiliary Carry flag(AC), Zero Flag(Z), Sign flag(S).
Carry
The MOV A,A instruction in the 8085 does nothing, not even change flags. It only consumes time, specifically four clock cycles plus applicable wait states.
; Exact answer: LXI H, FFFFH push H POP PSW
The compare and subtract instructions in the 8085 both subtract one operand from another, and set flags accordingly. The subtract instruction stores the result in the accumulator, while the compare instruction does not - except for the flags, the compare instruction "throws" the result away.
for dcs 8086 and 8085 are usually used as base microcontroller as these have indication flags which r signaled to registers
In the 8085 microprocessor, the Arithmetic Logic Unit (ALU) affects five flags in the status register: Sign Flag (S), Zero Flag (Z), Auxiliary Carry Flag (AC), Parity Flag (P), and Carry Flag (CY). The Sign Flag indicates the sign of the result; the Zero Flag is set if the result is zero; the Auxiliary Carry Flag is used for BCD operations; the Parity Flag indicates whether the number of 1s in the result is even or odd; and the Carry Flag indicates an overflow in arithmetic operations. These flags help in decision-making for subsequent operations and control flow in programs.
The 8085 microprocessor has an 8-bit flag register, even though it only has 5 flags, because all of the registers in the 8085 are 8-bit or 16-bit. In fact, the flags register is considered to be part of the accumulator, as one "register pair", for purposes of stack push/pop and interrupt call/return. Be warned, however, that you should not attempt to change the state of bits stored on the stack and then pop'ing them into AF, because some of the three "unused" bits might be undocumented but actually used, or their meaning might change between different versions of the chip.
8085 is a microprocessor designed by Intel
In the 8085 microprocessor, the status flags are specific bits in the flag register that indicate the outcome of arithmetic and logical operations. There are five main flags: the Sign Flag (S), Zero Flag (Z), Auxiliary Carry Flag (AC), Parity Flag (P), and Carry Flag (CY). The Sign Flag indicates the sign of the result, the Zero Flag indicates if the result is zero, the Auxiliary Carry Flag is used for BCD operations, the Parity Flag indicates if the number of set bits is even or odd, and the Carry Flag indicates an overflow in arithmetic operations. These flags are essential for decision-making in program execution and control flow.