0
What else can I help you with?
How many instruction are there in 8085 mp?
There are 74 instructions in the 8085 microprocessor.
What are the various flags used in 8085?
there are 5 flags of intel 8085 are: Carry flag(CY), parity flag(P), Auxiliary Carry flag(AC), Zero Flag(Z), Sign flag(S).
Why increment INR instruction in 8085 does not affect carry flag?
INR affect the carry flag.
Why DAD instruction only affect carry flag in 8085?
Carry
What is the use of AC Flag in 8085?
The Auxiliary Carry (AC) flag in the 8085 indicates a carry out of the low order 4 bits of an operation, more specifically that the low order 4 bits are greater than 9 (10012). The AC flag can thus be used to facilitate decimal arithmetic.
How many total instructions are there in 8085 MP?
there are 74 instruction sets in the 8085 up which consist of 246 bit pattern.
Why memory capacity of 8085 mp is 64 KB?
The memory capacity of the 8085 microprocessor is 64 kb because the address bus is 16 bits, and you can address 216, or 64kb, with a 16 bit address bus.
What is the function of processor status word in 8085?
Processor status word ( PSW ) in the case of 8085 refers to the collection of the values of the flag register and accumulator. It is used with the command push: PUSH PSW With this command, the proccessor saves the value of accumulator (A) and the values of the flag bits to the stack.
Why the name 8085 Why the name 8085 for microprocessor?
8085 is a microprocessor designed by Intel
Show the bit positions of various flags in 8085 flag register?
The 8085 microprocessor has 5 flags: 1. Zero flag: The zero flag is set, when the ALU operation results a zero . 2. Carry flag: If an arithmetic operations results in a carry, this flag is set. 3. Parity flag: This flag is set, when an arithmetic or logical operation results in a data, which has even number of 1s. If otherwise, it is reset. 4. Sign flag: After the execution of an arithmetic or logic operations, if D7 bit of the accumulator is 1, it indicates a negative number and this flag is set. If otherwise, it is reset. 5. Auxiliary Carry flag: used for BCD Operations, During the BCD operations, if D3 bit producing the carry then the AC bit set as1, otherwise the bit is 0. 6. Carry Flag: when a carry is generated by digit D7, then the carry flag set as 1, otherwise the bit will be 0.
Why the 16 bit 8085 microprocessor is not possible?
The 8085 was replaced with the 8086/8088. As such, there is no 16 bit version of the 8085.
Difference between 8080 and 8085?
The 8085 has a single +5V power supplyThe 8085 has a multiplexed low order address busThe 8085 has extra single pin interrupts, TRAP, RST7.5, RST6.5, and RST5.5The 8085 has serial I/O pins SID and SODThe 8085 has maskable interrupts and the RIM/SIM instructionThe 8085 includes the functionality of the 8224 clock genereator and 8228 system controllerThe 8085 added several 16 bit operations
