0
Line balancing is the practice of assigning workloads and monitoring to make sure that everyone is doing the job they need to be doing. An example would be a telemarketing office with several employees. If a person is polishing their nails, for example, instead of answering phones, that person is going to be leaving the company if the other employees are being overworked because of it.
What else can I help you with?
Explain why it is important to line up decimal numbers by their place value when you add or subtract them?
explain why it is important to line up decimal numbers by their place value when you add or subtract them
Do you have to line up the decimals when you subtract?
Line up the numbers in such a way that the decimal points are aligned. . Example: 567.89 - 23.4 567.89 - 23.4 ===== 544.49
Write a qbasic program to display A NEW LINE?
In QBasic, you can display a new line using the PRINT statement. To create a new line, you can simply use an empty PRINT statement. Here’s a simple example: PRINT "This is the first line." PRINT ' This will create a new line. PRINT "This is the third line." This program will display the first line, then move to a new line, followed by the third line.
What is the denomanator?
The portion of the fraction below the divide line For example, in 1/2 two is the denoninator.
Explain how to use the absolute value to find the number of degrees below zero the temperature was at noon?
To find the number of degrees, we will use number line.
Why balancing line is providing in steam turbine?
for thrust balancing.
What are the objectives of line balancing?
The objectives of line balancing are to optimize the flow of work, reduce idle time, and increase efficiency in a production line. Balancing the line helps to evenly distribute workload among workstations, minimize bottlenecks, and improve overall productivity.
Understand in science-fiction jargon?
There are glossaries you can find on-line that explain much of the more common sf jargon. and many more.
What is the function of balancing line in a centrifugal pump or compressor?
The balancing line is a transmission line consisting of two conductors of the same type, that are grounded to the compressor's circuits and to the ground and helps keep external noise down.
What is the Use of Balancing line in Boiler feed pump?
Boiler feed pump's suction pressure be aprox. 15Kg/cm2 and discharge pressure be 180Kg/cm2. So the balancing line balance the pressure and protect the boiler feed pump. my quastion is that what is the working principal of balancing leak off
What is plant capacity and line balancing?
Plant capacity is the maximum amount of production for a specific production facility. Line balancing occurs within a plant with multiple production lines. Resources may be moved between production lines in order to achieve the right mix of finished products. For example, for each car body produced other lines may produce four wheels, two seats, two tail lights, etc. so that final assembly will have available the right mix of parts. Producing extra doors, for example, will not increase total plant output for the day and may result in storage problems which line balancing would have prevented.
When do you use line graphs in maths?
When form example showing the difference in each year of the increase of carbon dioxide. Does that answer your question or do i have to explain further??
What is balancing line in boiler?
The balancing line in a boiler refers to a specific operating point on a steam generation curve where the heat input from fuel combustion matches the heat output from steam generation. This line helps maintain efficiency and stability within the boiler system, ensuring that the steam pressure and temperature remain within desired limits. Properly managing the balancing line is crucial for optimizing performance and preventing issues such as overpressure or inefficient fuel use.
How do you explain straight line graphs?
it just a straight line
Why is used the balancing line in boiler feed pump and its direction of flow?
In boiler feed pumps usually the discharge pressure is 20 to 30 times tie suction Pressure so to protect the pump balancing line is given from discharge to suction.
What has the author Armin Scholl written?
Armin Scholl has written: 'Balancing and sequencing of assembly lines' -- subject(s): Assembly-line balancing, Planning, Assembly-line methods, Data processing, Heuristic programming, Production planning, Production scheduling
Do you understand the definition of a line segment?
Yes, I do understand the definition of a line segment. A line segment is a line that actually has two endpoints. Such endpoint is a triangle's or a square's side.
