answersLogoWhite

0

The impeller on a 9.8 Mercury outboard boat motor can be easily changed. Remove the retaining bolt. The impeller will come off. Reverse the process to install the new impeller.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

Change front wheel bearing on 1998 mercury mountaineer?

how do you change wheel bearing on 98 mercury mountaineer


What is the proper fuel oil mixture for a 1998 Mercury twenty five hp outboard?

The required fuel/oil ratio for the 98 model, 25 hp Mercury outboard is 50:1. This is roughly one pint of 2 cycle oil, to six gallons of fuel.


What is the weight of a Force 90hp outboard?

About 115kg on a 98.


What is a mercury force 40 hp outboard worth 98?

Depending on condition. does it have tilt and trim, are the throttle controls with etc .. between 600-1000 If in good condition. Hope this helps


How do you change the transmission mounted speed sensor on a 98' mercury sable?

The sensor will either screw in or have a bolt holding it. Disconnect the wiring plug then unscrew or remove the bolt to change.


What freon does a 98 mercury villager?

R-134


What is engine oil capacity for 98 4 cylinder mercury mystique?

4.5 quarts ( 4.25 liters ) with oil filter change - according to the owners manual


Find the percent of change when 98 is decreased to 6?

absolute change = 6 - 98 = -92 relative change = (-92)/98 = -0.938776 percentage change = 100*(-92)/98 = 100*(-0.938776) = -93.8776%


What is the spark plug gap on a 1998 Johnson 70 hp two cycle outboard?

The 98 model, 70 hp Johnson 2 stroke outboard, requires a .030 plug gap.


How do you set the timing on a 2.0 mercury tacer?

how to set timing belt on a 98 mercury tracer 2.0


What type of freon do you use for 98 Mercury Mystique?

R134a


How do you change heater core in 98 suburban?

how to change heater core in 98 suburban