To fix a sticking float on an 18hp Briggs & Stratton engine, first remove the carburetor and inspect the float and needle for dirt or damage. Clean the carburetor thoroughly with carburetor cleaner, ensuring all passages are clear. Check the float for proper movement; if it's damaged or heavy with fuel, replace it. Reassemble the carburetor, making sure the float and needle seat properly, and then reinstall it on the engine.
Your Fluidmaster float may be sticking due to debris or mineral buildup in the valve. To fix it, try cleaning the valve and float assembly with a mixture of vinegar and water. If that doesn't work, you may need to replace the float assembly.
Your Kohler toilet float may be sticking due to debris or mineral buildup in the tank. To fix it, you can try cleaning the float and the valve with a mixture of vinegar and water to remove any obstructions. If that doesn't work, you may need to replace the float or the valve mechanism.
Your toilet float valve may be sticking due to debris or mineral buildup, causing it to not function properly. To fix it, you can try cleaning the valve and the surrounding area to remove any obstructions. If that doesn't work, you may need to replace the float valve with a new one.
Remove the float from the Regal. inspect the float for leaks, then check the spring and needle valve as it could be stuck. If all parts are ok then the parts need cleaning as they are sticking.
I would start with float sticking or maybe fuel filter plugged filter and run some good carb cleaner threw a tank of fuel if that does not fix your problem you may have to take the carb apart and clean it.
either the floats are set wrong or the little valve under the float is sticking not hard to fix
Start by trying a good carb cleaner in the gas. If that does not work you will have to take the carb. apart and clean it. Hope this helps.
To fix a sticking door, you can try tightening the hinges, sanding down the edges of the door, or applying lubricant to the hinges.
Fix the oil? You don't fix it you just change it every 50 hours.
Its probably the float in the gas tank that tells how much fuel is left in the tank... its sticking.
To adjust the toilet float to fix a running toilet, locate the float mechanism in the toilet tank and adjust the float arm or screw to lower the water level. This will help stop the water from continuously running.
Heavy grease at the joint.