0
you must first put on your yamaha hose adapter for your garden hose. then without turning the water on plug the hose into the yamaha. there should be a place to put the hose in the engine compartment. then start your engine the turn the water on. make sure the water never on when the engine is off. let the pwc run at idle speed for 240 seconds (4 mins). then turn the water off and shut down your engine. gracias
What else can I help you with?
What to do when you flush motor of waverunner incorrectly?
If you've flushed the motor of a Waverunner incorrectly, first turn off the engine immediately to prevent any potential damage. Disconnect the water source and inspect the engine for any signs of water intrusion or leaks. Follow the manufacturer's instructions for flushing the motor to ensure proper procedure in the future. If you're unsure or notice any issues, consult a professional technician for a thorough inspection.
Where is the serial number for the motor on a 1989 Yamaha WaveRunner 500cc?
should be on a tag on the flywheel end of motor
What does a motor flush do?
A motor flush is designed to help clean any sludge from the engine. A cleaner system will make fluids flow easier, and make the engine last longer.
How much is a old can of gunk motor flush worth?
.01$
How do you change oil in a Yamaha fx-ho waverunner?
part number for 2010 fxho waverunner oil filter
How do you flush a 2002 Yamaha WaveRunner?
to flush the fx140 you lift up back of seat and you will see a small black hose with a plug in it . you pull this plug then put your Yamaha hose adapter onto the end of your hose and connect it to the black hose .turn on the water then start engine let run 2 minutes and your done
Can you pull a wakeboarder with a waverunner?
Yes, it is possible to pull a wakeboarder with a waverunner by attaching a tow rope to the waverunner and the wakeboarder. However, it's important to ensure that the waverunner has enough power and stability to safely pull the wakeboarder. Additionally, following proper safety precautions and regulations is essential when engaging in this activity.
How do you start your 1992 Yamaha 650 waverunner?
like any 2 stroke chainsaws weed eaters merc outboards motor mowers ,motor bikes check fuel prime don;t flood first pop choke in.
How fast does a 92 waverunner go?
waverunner iii 650 goes about 38-40 mph. at least that's what my speedo says.
How do you do an oil engine flush?
Add Engine Flush to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Engine Flush is compatible with all commercially available motor oils. We recommend cleaning the engine interior with Engine Flush before every oil change.
What is trim on a waverunner?
Trim is for going faster. It causes all the weight of the waverunner to go forward. If you experiment with it you will notice the difference. Hope this helps.
1993 Kawasaki WaveRunner no acceleration?
ON 2007 KAWASAKI WAVERUNNER WHERE IS THE BATTERY LOCATED? I TOOK THE SEATS OFF AND CAN'T FIND IT AND I DON'T HAVE AN OWNERS MANUAL.
