The best solar panel for a 6000-watt submersible pump would typically be a combination of high-efficiency panels to ensure sufficient energy generation. You would likely need a solar array consisting of multiple panels, each rated between 300 to 400 watts, totaling around 15-20 panels depending on local sunlight conditions and panel efficiency. Additionally, consider using a solar charge controller and inverter suitable for the pump's voltage and power requirements. Brands like Canadian Solar, LG, or SunPower are known for their high-efficiency panels.
Watts divided by volts equals amps so 6000 divided by 120 = 50
6000 watts = 6 kilowatts The conversion factor from kilowatts to watts is multiplying by 1000.
The equation that you are looking for is I = W/E. Amps = Watts/Volts.
I'm assuming the electrical system is single phase, such as a home. If not, you need to hire someone to do the work for you. First, 6000 watts at 120v is 50 amps, so if your load is truly 6000 watts, 30 amps isn't enough. If your 6000 watts is 240v, which would draw 25 amps, then 30 amps is plenty. Ten gauge wire may not be placed an a breaker or fuse larger than 30 amps.
6000 kilo watts
The equation that you are looking for is Amps = Watts/Volts. There are 6000 watts in 6kW.
6000 joules / 70 seconds = 85.71 watts
The units are not freely convertible. You would need to specify a voltage.
P=I^2*R. No. 8,000 watts.
Yes, Power (in watts) equals voltage times current (Amps). Amps = Watts/Volts If your generator is 6000 watts that would operate a 120 volt load up to 50 amps (6000/120=50). If you are running a motor or compressor, the initial inrush of current is about 3 times higher so 14 X 3 = 42amps. Should do fine...
Six KVA is the same as 6000 watts. As you can see, the appliances have to be totaled up to the amount of 6000 watts to see how many can be used. Each device has its own wattage on the manufactures label and it is usually different for different appliances.
25 amps, 6000 watts