0
What else can I help you with?
What chemicals do you need for a pool?
To maintain a pool, you'll typically need several key chemicals: chlorine or bromine for disinfection, pH balancers (such as sodium carbonate or sodium bisulfate) to keep the water's acidity in check, and alkalinity increasers (like sodium bicarbonate) to stabilize pH levels. Additionally, you may need calcium hardness increasers to prevent corrosion and scale formation, as well as algaecides to prevent algal growth. Regular testing and adjustment of these chemicals ensure safe and clean swimming water.
What chemical can replace swimming pool stabalizer?
Nothing
Basic principles and calculations in chemical engineering answer?
Draw a sketch of the following processes and place a dashed line around the system: (a) Tea kettle (b) Fireplace (c) Swimming pool
Application of plate heat exchanger?
The plate heat exchanger is used in multiple systems in the field of HVAC, including geothermal water heating systems, instantaneous domestic hot water systems, semi-instantaneous domestic hot water systems, swimming pool constant temperature maintenance systems, solar hot water systems, etc.Plate heat exchanger systems provide plate heat exchanger designs for each application:1. Geothermal water heating system: The heat exchanger acts as a separate device for the host of the heat pump and the open cold and heat source, which overcomes the corrosion of sensitive equipment such as the host by water quality.2. Domestic hot water system: The good heat transfer performance makes the plate heat exchanger gradually replace the traditional container heating system, with a smaller area and more economical investment.Instantaneous domestic hot water system-to ensure that users have hot water supply anytime, anywhere, compact system, no storage tank required, large boiler capacity required, large heat exchanger Semi-instantaneous domestic hot water system—requires smaller boiler capacity, smaller heat exchanger, easy to grow bacteria in the storage tank, and requires additional places for the storage tank.3. Swimming pool constant temperature maintenance system: Install a heat exchanger to make the pool water circulate independently. In order to avoid the corrosion of the plate by the chloride ion in the pool water, please choose the plate material carefully.4. Solar hot water system: As one of the clean energy sources, solar energy has attracted more and more attention. By using a heat exchanger, the loop for collecting solar energy and the loop for domestic hot water can be separated, thereby effectively protecting it. Cleanliness of the domestic hot water loop.If you want to know more, you can search：YOJO
Which fraction of crude oil provides the chemical feedstock for the petrochemical industry?
Naphtha often provides feedstock to the petrochemical industry. This is especially true in countries in which the vehicle fleet is centered on diesel fuel (such as European countries). The United States has historically had a vehicle fleet balanced between gasoline and diesel fuels, resulting in the maximization of naphtha blended into the motor fuels pool. Therefore, most of the petrochemicals in the U.S. are produced by turning natural gas into ethylene. As of 2012 the U.S. is undergoing a slight dieselisation of its vehicle fleet; however, natural gas prices at 10 year lows continue to make natural gas the most cost effective route for producing petrochemicals in the U.S.
What is the recirculate position on a pool filter valve for?
intex sand filter is not working on filter only working on recirculate position.....what should we do
How do you put the pool pump on recirculate?
To put a pool pump on recirculate, locate the multiport valve on the filter system and turn it to the "Recirculate" setting. This bypasses the filter, allowing water to flow directly from the pool to the pump and back without going through the filtration system. Ensure the pump is turned off before making this adjustment, and then restart the pump after setting it to recirculate. This mode is often used for specific tasks, like adding chemicals or when the filter is being cleaned.
What is the difference between filter and recirculate on a pool pump?
First of I think you may be referring to the pool filter not the pump. "Filter" runs the water thru the filter thus filtering the water. Recirculate, I believe, bypasses the filter media and sends the water back to the pool unfiltered. K
What does recircluate mean on my pool filter?
"Recirculate" on your pool filter setting means that the water in your pool will flow through the pump and back into the pool without passing through the filter. This setting is often used to quickly circulate water, mix chemicals, or when you want to bypass the filter for maintenance. It allows you to maintain water circulation without filtering it, which can be useful in certain situations.
When should you use the recirculate mode on your pool filter?
Very rarely as a mater of fact only in an emergency most problems with pool water can be overcome with the right treatment. Take a sample of water into the local pool shop and get their opinion, this is usually a free service A: In Calif. - average about every 5 to 8 yrs. k
What is the function of the recirculate position on a multiport valve?
Recirculate allows water to circulate through the system but bypasses the filter. This allows one to keep the pool water flowing, and components like a salt water chlorinator running, even if the filter is broken.
Does pool filer sand filter out chemicals?
No.
What setting should you have your pool on for normal operation?
If you're talking about your pool filter, it should be set to filter or run. Use the bypass or recirculate setting if you wish to circulate the water without having the water pass through the filter. Use the backwash setting to clean the filter.
How can one assess if his pool has a clog in the filter line and how does he fix it?
Check the psi on the filter tank? If its lower than usual there is something stuck in the lines or jammed in the pump impeller. If its higher than normal, it just needs to be cleaned. Also, if you put the multiport handle into the recirculate position, this will bypass the filter. If everything works better in recirculate then you have a filter problem
How do use a multi valve pool filter?
Need more specific info A multi valve pool filter is a common configuration of valve and filter for a swimming pool system. The piping into and out of the filter is attached to a multivale. A multivalve has has several positions. One type of multi valve has six positions: backwash, waste, filter, closed, rinse and recirculate. (These valve positions are used on a DE filter. A sand filter may be different.) Use the filter setting in the nromal operation of your pool. This setting receives water from the pump and directs it to the dirty side of the filter media and then receives weater from the clean side and directs it to the pool. Use the Backwash setting to flush the DE from the filter and to a drain. Use the waste setting to flush water directly from the pump to the drain. The closed position is, well, closed. Rinse? Recirculate?
What setting should filter be on when adding chemicals?
The filter should be set to the "circulate" or "backwash" position when adding chemicals to the pool. This will help distribute the chemicals evenly throughout the pool water. Make sure to follow the specific instructions provided on the chemical packaging for best results.
Do you backwash your pool before you put chemicals in?
No you only backwash your pool when your filter pressure on your filter is high 30psi and above on most pools. If you backwash your pool be sure to add two scoops of de to your skimmer. If the presure is still high the u need to clean the filter
