32.95 / (54.6 - 50.0 ) = 7.163 g/cm3 = 7163 kg.m3
Density.
If you know the density of the liquid, you could just weigh the material.
The term specific gravity means density in comparison to that of water. Density is weight divided by volume. So to get the volume, pour the oil into a graduated cylinder or measuring cup (same principle). To get the weight, use a scale (a chemist would use a triple beam balance). Once you have the density you can divide it by the density of water, and the result is the specific gravity.
You use water displacement and plug the numbers into the density equation. Below is a step by step guide on how to use it. 1. Get a graduated cylinder, or anything that you can measure water in. 2. Fill the graduated cylinder with water. 3. Record the volume 4. Place the object you want to find the density of in the water. 5. Subtract the value you got in #3 from #4. This number represents the volume of the object you want to find the density of. 6. Take the object you want to find the density of, and weigh it. 7. Then take the 2 numbers you got and plug them into the formula d=m/v D=density, m=mass (weight in grams), v=volume NOTE: The ONLY liquid you can use for water displacement is WATER!
To find the density of a substance you need the mass as well as the volume. The mass is 10 grams so all you need to do is find the volume. It is easiest to do this using displacement of water in a graduated cylinder. I would take a 100 mL graduated cylinder and fill it up with water to.. lets say.. 50 mL. Furthermore, very slowly add the granular salt to the graduated cylinder using a funnel, being sure not to spill any. Now read how much is in the graduated cylinder. Second value - first value = volume of salt. Divide 10 grams by the volume. Answer would be in ___grams/mL^3
Mass and volume are needed to calculate the density of a graduated cylinder.
You cannot measure the mass of a solid with a graduated cylinder.
use a graduated cylinder
not quite. you can measure volume in a graduated cylinder. you can use a scale, water, and a graduated cylinder to find out the density of an object by filling the graduated cylinder to an easily calculated point (250) then dropping your object in the water making sure none splashes out then measure the difference, then weigh it and divide the mass by volume to get density.
The question seems absurd has no meaning. measuring cylinder is a device to measure the volume. if you want to find density of a cube, you an find volume displaced and knowing mass can find the density - Archimedean principle it is beyond the scope of this page to answer fully
If you know the density of the liquid, scales could be used to determine the mass and then plugged into the equation:- volume = mass/density A measuring cylinder could also be used. Stuck on the third one though...I guess you could use a burette, but generally they're only used for titrations.
density -------- Graduated cyllinders are used to measure volumes of liquids, powders or fine granules.
34.5/19.3=1.79mL (19.3 is the density of gold)
Density.
Use a solvent which do not dissolve the solute. For example, if you want to determine the density of sugar, and sugar, as we all know, is soluble in water. So, instead of water we can substitute it with oil.
If you are going to weigh a liquid in a graduated cylinder, the weight that you will get when you place the cylinder on the scale will be the combined weight of the cylinder and its contents. To find the weight of the contents alone, you therefore have to subtract the weight of the empty cylinder. And to calculate density you need to know both the weight and the volume.
If you are going to weigh a liquid in a graduated cylinder, the weight that you will get when you place the cylinder on the scale will be the combined weight of the cylinder and its contents. To find the weight of the contents alone, you therefore have to subtract the weight of the empty cylinder. And to calculate density you need to know both the weight and the volume.