(0.980 g H2SO4/g soln)x(1.84 g soln/mL soln)x(1 mol H2SO4/98.1 g H2SO4)x(1000 mL/1 L)=18.4 M
BOOM!
100% sulfuric acid rapidly decomposes until it reaches a concentration of 98%. This concentration is usually referred to as concentrated sulfuric acid. The pH value of 98% sulfuric acid is approximately -1.5 For comparison, sulfuric acid of this concentration has about 300 times as many active hydrogen ions as stomach acid (approximate pH 1).
The (N) stands for Normal. 1 Normal is 28 ml of concentrated sulfuric acid added to deionized water for a final volume of 1 Liter (L). 18 N is roughly a 50 percent concentration sulfuric acid.
It will immensely cost to totally remove the impurities in sulfuric acid. For industrial purposes, they maintain a percentage value around 98%.
512 GRAMS Divide the quantity by the SG: EG1000 litres divide by 1.28 = 781.25 litres per tonne. dumb*** has to use percent sulfuric acid .4*.391=.1564 *1000=156ml of sulfuric acid 156*1.28=200.2 grams H2SO4 in .4L and is 5.1M
You need to know density and percent by weight. Then use the following formula: ((1000)density x % by weight) / formula mass=concentration
BOOM!
100% sulfuric acid rapidly decomposes until it reaches a concentration of 98%. This concentration is usually referred to as concentrated sulfuric acid. The pH value of 98% sulfuric acid is approximately -1.5 For comparison, sulfuric acid of this concentration has about 300 times as many active hydrogen ions as stomach acid (approximate pH 1).
Calculate the weight of sucrose for the desired volume and concentration of the solution.
The (N) stands for Normal. 1 Normal is 28 ml of concentrated sulfuric acid added to deionized water for a final volume of 1 Liter (L). 18 N is roughly a 50 percent concentration sulfuric acid.
It will immensely cost to totally remove the impurities in sulfuric acid. For industrial purposes, they maintain a percentage value around 98%.
6M
512 GRAMS Divide the quantity by the SG: EG1000 litres divide by 1.28 = 781.25 litres per tonne. dumb*** has to use percent sulfuric acid .4*.391=.1564 *1000=156ml of sulfuric acid 156*1.28=200.2 grams H2SO4 in .4L and is 5.1M
Percent error refers to the percentage difference between a measured value and an accepted value. To calculate the percentage error for density of pennies, the formula is given as: percent error = [(measured value - accepted value) / accepted value] x 100.
How to work it out - Calculate the concentration of the solution in terms of molarity. Calculate the hydrogen ion concentration from the fact that multiplying the hydrogen and hydroxide concentrations (in mols per litre) will always give 1x10-14. Take the -log10 of the hydrogen ion concentration.
No. 50% Sulfuric acid is 18.4 Normal. 50N (Normal) sulfuric acid is, umm, 136% (not possible).
yes!