Apparently it does. Try this at home: Light your torch and listen to the sound it makes while burning. Then blow it out with your breath, noise stops, why I don't know. I am still trying to figure out why it burns when I pee.
A blue flame is louder than a yellow flame because there is more oxygen (air) flow present than with a yellow flame. The yellow flame indicates a lack of oxygen and incomplete combustion of the methane gas.
To make the burner burn a blue flame, ensure that the air intake is adjusted correctly so that the right ratio of air and gas is being mixed. A blue flame indicates complete combustion and is typically achieved by allowing enough air into the burner. Adjust the air shutter or venturi to achieve a blue flame.
To create a safety flame on a Bunsen burner, adjust the air hole to allow more air to mix with the gas. This will produce a hotter, lighter blue flame rather than a yellow, sooty flame. Adjust the gas flow until the flame burns steadily without flickering or making noise.
clean blue flame
The blue flame is commonly known as a "butane flame" or a "clean burning flame." It occurs when a gas like butane is burned cleanly, resulting in a hotter and more efficient flame that appears blue in color.
Your not hearing the flame your hearing the gas move through the burner. and it is louder because it takes more gas moving through (so gas moving faster) than it does for a flame that is not as hot.
A safety flame typically produces very little noise, if any at all. The noise level is generally minimal as the flame burns steadily and quietly.
The hottest flame on a Bunsen burner is typically the blue cone-shaped flame. You can adjust the air and gas flow to achieve this flame, which is characterized by a steady, roaring noise. To confirm the hottest flame, you could use a thermometer to measure the temperature at the tip of the flame.
There are actually two flames that appear one is yellow & other is blue. And the blue flame makes more noise than the yellow.I think it is the sound of air rushing through the vents to get to the flame. The reason you get the yellow flame is that the gas is not burning completely. It is when you open up the vents that the flame is adjusted to blue.
A blue flame is typically hotter than a yellow flame, which can lead to more turbulent combustion and the production of more noise. The higher temperature of the blue flame also causes gases to expand more rapidly, resulting in higher velocity and increased turbulence, creating more noise.
The flame itself does not, at least, not a noticeable one, however, you can sometimes hear the gas leaving the source.
A blue flame is louder than a yellow flame because there is more oxygen (air) flow present than with a yellow flame. The yellow flame indicates a lack of oxygen and incomplete combustion of the methane gas.
By increasing the size of the opening at the base, allowing more oxygen to the flame. The hottest flame is the blue flame.
To make the burner burn a blue flame, ensure that the air intake is adjusted correctly so that the right ratio of air and gas is being mixed. A blue flame indicates complete combustion and is typically achieved by allowing enough air into the burner. Adjust the air shutter or venturi to achieve a blue flame.
To create a safety flame on a Bunsen burner, adjust the air hole to allow more air to mix with the gas. This will produce a hotter, lighter blue flame rather than a yellow, sooty flame. Adjust the gas flow until the flame burns steadily without flickering or making noise.
Blue flame. because it does not have carbon
clean blue flame