0
What else can I help you with?
How do you separate sulfur suspended to water?
You can separate sulfur suspended in water by filtration. Pass the sulfur-water mixture through a filter to trap the sulfur while allowing the water to pass through. The collected sulfur can then be dried and separated from the filter.
How do you separate sulfur sand iron filings?
Iron fillings has the property of being magnetic, so you could pass it through a magnetic drum to remove it leaving sulfur and sand. Since sulfur is a solute it will dissolve in water leaving sand and forming a solution. You can then pass that through a filter separating the sand and the solution containing water and sulfur. Now you can put the solution in an evaporating basin to evaporate the water leaving the sulfur.
How do you separate sulfur and sand and iron fillings?
you can easily remove iron with magnet. then if you do not care about the sulfur you can set it on fire, and what is left will be pure sand. If you do care about sulfur i don't think i can help you.
Is it possible to separate iron and sulfur after being heated?
Yes, it is possible to separate iron and sulfur after being heated. One common method is using a magnet to separate the iron, as it is magnetic, while the sulfur remains in its powdered form. Another method is to dissolve the mixture in a solvent, filter out the solid sulfur, and then evaporate the solvent to recover the separated components.
How will you separate a mixture of common salt and sulfur?
To separate a mixture of common salt (sodium chloride) and sulfur, you can use the process of filtration. The mixture can be dissolved in water, allowing the salt to dissolve while the sulfur remains solid. Filtration can then be used to separate the solid sulfur from the liquid salt solution. The salt can be recovered by evaporating the water.
How do you separate sulfur suspended to water?
You can separate sulfur suspended in water by filtration. Pass the sulfur-water mixture through a filter to trap the sulfur while allowing the water to pass through. The collected sulfur can then be dried and separated from the filter.
How do you separate sulfur sand iron filings?
Iron fillings has the property of being magnetic, so you could pass it through a magnetic drum to remove it leaving sulfur and sand. Since sulfur is a solute it will dissolve in water leaving sand and forming a solution. You can then pass that through a filter separating the sand and the solution containing water and sulfur. Now you can put the solution in an evaporating basin to evaporate the water leaving the sulfur.
How can you separate sulfur from water?
Sulfur can be separated from water through a process called distillation. By heating the mixture, the water will evaporate leaving the sulfur behind. The water vapor can then be condensed back into a liquid form, effectively separating the two substances.
How do you separate ammonium chloride and sulphur from its mixture?
Ammonium chloride is soluble in water, sulphur isn't. So mix the mixture with water and filter out the sulphur. Now evaporate the filtrate to obtain the ammonium chloride and permit the sulphur to dry.
How do you separate sulfur and sand and iron fillings?
you can easily remove iron with magnet. then if you do not care about the sulfur you can set it on fire, and what is left will be pure sand. If you do care about sulfur i don't think i can help you.
Is sulfur flammable?
Yes, it is flammable, but actually melts at 300 degrees Celsius.
Is it possible to separate iron and sulfur after being heated?
Yes, it is possible to separate iron and sulfur after being heated. One common method is using a magnet to separate the iron, as it is magnetic, while the sulfur remains in its powdered form. Another method is to dissolve the mixture in a solvent, filter out the solid sulfur, and then evaporate the solvent to recover the separated components.
How do you separate sulf sodium chloride?
Sulfur is not soluble in water, sodium chloride yes. Filter the solution containing S and NaCl; sulfur remain on the filter, NaCl solution passes the filter. Evaporate te water by heating to obtain crystallized NaCl.
Does chocolate evaporate?
does chocolate evaporate does chocolate evaporate does chocolate evaporate does chocolate evaporate does chocolate evaporate does chocolate evaporate does chocolate evaporate does chocolate evaporate does chocolate evaporate does chocolate evaporate does chocolate evaporate
How do you separate copper strips from sulfur powder?
To separate copper strips from sulfur powder, you can use a process called filtration. Mix the copper strips and sulfur powder with water to form a mixture. Then, pass the mixture through a filter paper to separate the solid copper strips from the sulfur powder, which will remain in the filter paper.
How will you separate a mixture of common salt and sulfur?
To separate a mixture of common salt (sodium chloride) and sulfur, you can use the process of filtration. The mixture can be dissolved in water, allowing the salt to dissolve while the sulfur remains solid. Filtration can then be used to separate the solid sulfur from the liquid salt solution. The salt can be recovered by evaporating the water.
How do you separate a mixture of sugar and sulphur?
To separate a mixture of sugar and sulfur, you can use water to dissolve the sugar while leaving the sulfur undissolved. First, add water to the mixture and stir, allowing the sugar to dissolve completely. Then, filter the mixture; the dissolved sugar will pass through the filter paper, while the sulfur remains on the paper. Finally, evaporate the water from the collected solution to obtain the sugar.
