Tanalised timber refers to wood that has been industrially treated using a controlled vacuum pressure process with the Tanalith preservative.
Tanalith C preservative contains chromated copper arsenate. In Europe, the use of Tanalised C pressure treated timber was restricted in 2006, and its successor in this market is Tanalised E pressure treated timber, which contains copper and triazole biocides.
Timber treated with any Tanalith preservative is resistant to leaching but should be handled with care and any exposed skin is recommended to be washed before eating, drinking or going to the toilet. Avoid handling treated timber that is wet.
See the Related links for more information.
Tantalized wood is industrially treated with the tanalith preservative. Tanalith treated wood is highly toxic and should not be burned in open fires or in homes. The chemicals released in the smoke and concentrated in the ashes is toxic and causes a variety of flu-like symptoms that vary depending on the severity of exposure.
Arsenic is a chemical element with the symbol As and atomic number 33. Its most common forms are inorganic arsenic compounds such as arsenic trioxide and arsenic pentoxide. These compounds are highly toxic to humans and can be found in certain pesticides, wood preservatives, and some types of metal alloys.
Covalent bonding with polar bonds. As2O5 forms a giant molecule with a complex structure.
It is VERY bad. CCA stands for Chrome Copper Arsenic. Chrome and Arsenic are both very toxic heavy metals. It can make you very sick, or kill you. DO NOT BURN TREATED LUMBER. In Britain, the term "tanalized" may be used instead of CCA.
Arsenic damages the body by binding to bonds between sulfur atoms in proteins. The effects on metabolism largely stem from impairment of an enzyme that helps the breakdown products of glucose enter the mitochondria, where energy is extracted. Without the action of this enzyme, thanks to the arsenic exposure, cells run out of energy.
Tanalised is a term used in Europe for wood that has been treated to resist rot and insects. In the US it is known as CCA, after the metals used in treating the wood- Chrome, Copper, and Arsenic. This wood has been withdrawn from consumer contact applications- like handrails, surface deck boards, etc, due to concerns about arsenic leaching out of the wood. Wood treated with arsenic should NOT be burned due to health hazards, and safety measures should be taken to avoid breathing dust if sand, sawing or routing treated lumber.
For more on tanalised wood check out the following: http://www.delston.co.uk/tanalised.htm
Tanalised timber, treated with preservatives to resist rot and insects, can be harmful to pets due to the chemicals used in the treatment process, such as copper, chromium, and arsenic in older formulations. While modern treatments have reduced toxicity, ingestion of wood or exposure to treated surfaces can still pose risks. It's best to ensure pets do not chew on or ingest tanalised timber and to consult a veterinarian if you have concerns about exposure. Always monitor pets around treated wood products.
NO!!! Tanilised wood is another term for lumber that has been chemically treated to resist rot and insects. The chemical used are CCA- copper, chrome, and arsenic. Chrome and Arsenic are especially toxic, and this wood is no longer sold in the US for "Consumer contact" lumber, such as decks, handrails, etc. Burning this wood in a wood stove or fireplace can expose you to very high levels of toxic metals. Illness or death is a strong possibility. Respiratory protection (a respirator or mask) should be worn when cutting or sanding this wood, and wash hands after handling it.
The blue marks on tanalised timber are caused by the copper-based preservative treatment used to protect the wood from decay and insects. These marks are a normal occurrence and do not affect the structural integrity or performance of the wood.
Tantalized wood is industrially treated with the tanalith preservative. Tanalith treated wood is highly toxic and should not be burned in open fires or in homes. The chemicals released in the smoke and concentrated in the ashes is toxic and causes a variety of flu-like symptoms that vary depending on the severity of exposure.
Tanalised timber refers to wood that has been industrially treated using a controlled vacuum pressure process with Tanalith preservative. Tanalised and Tanalith are registered trade marks of Arch Timber Protection, and may not be used to describe other formulations.Tanalith C preservative contains chromated copper arsenate (CCA). In Europe, the use of Tanalised C pressure treated timber was restricted in 2006, and its replacement there is Tanalised E pressure treated timber, which contains copper and triazole biocides - which are commonly used to protect food crops.The options for disposal of Tanalised wood are dependent on the formulation of Tanalith preservative that the timber was treated with, which can be identified by analysis. The Code of Practice in Related Links gives recommended advice on how treated timber can be disposed of effectively.Tanalised E may be burned in approved industrial incinerators, but should not be burned in open fires or home wood burners. Please see the Related Link for more detailed information.When burned, Tanalised C or CCA treated timber releases toxic chemicals into the air and concentrates them in the ash. The treatment of this timber may incorporate Copper, Chrome and Arsenic. These can all be classed as heavy metal toxins. Symptoms will vary depending on the degree of poisoning but can include:loss of appetite,nausea,vomiting,diarrhoea,skin tingling,cramping of muscles,seizures,hearing loss,sleepiness,confusion,headaches,fainting,dizziness.
Yes, you can sand treated or tanalised decking. However, be cautious as sanding may remove the protective treatment. It's recommended to use a gentle sanding approach to avoid damaging the wood.
Yes, there are products available to remove green marks from tanalised wood, often caused by mold or mildew. A mixture of water and vinegar or a specialized wood cleaner can be effective. It's important to test any cleaning solution on a small, inconspicuous area first to ensure it doesn't damage the wood. Additionally, using a soft brush can help lift the stains without scratching the surface.
Cutting a length of H3 tanalised wood does not affect its tanalising ability, as the treatment is applied throughout the wood to protect it from decay and insect damage. However, exposed cut ends may be more susceptible to moisture and pests unless they are treated with a suitable end sealant. It's advisable to seal any freshly cut surfaces to maintain the wood's protective qualities.
TANALISED timber relates to timber that has been industrially treated with TANALITH preservative under vacuum in an enclosed treatment vessel. The preservative manufacturer, Arch Timber Protection, has a website at www.archtp.com with a Consumer Information Sheet which contains advice regarding compatible glues for TANALISED E pressure treated timber. A range of glues are advised, depending on the end use of the treated timber.
TANALISED pressure treated timber has been impregnated with TANALITH E, a waterborne product.