0
Do NOT use this Orange Glo product nor buy any of the ebooks folks are trying to sell you on how to remove the build up/haze. I called Orange Glo's customer service line directly and found out how to remove this product off the floor. Their solution? Plain old ammonia and good old fashioned hands and knees elbow Yup, an entire weekend on my hands and knees, to get the floors back to their original luster because there was so much build up on them.
We've been using this product and at first it really looked nice but then the floors started looking dull and very scratched up. I didn't understand why and then noted streaks where some parts of the floor were shiny and others were dull so I scraped with my fingernail and removed some product. Underneath it was shiny. So I decided to Google and found that lots of people were having the same problem!
Directions from Orange Glo's customer service line:
1. Mix 1/2 cup of ammonia with 1 gallon of warm water.
2. Apply solution to floor with mop in inconspicuous place first to test.
3. Once you determine it's okay to use on your floors...apply to floor and let stand for 5 minutes.
4. Wipe up the solution with a clean soft cloth.
5. Wipe with circular motion if there is more of a build up.
6. According to how much build up you have...you might have to repeat the process until it's all off.
I'm very disappointed this product is still being sold in stores as no one should ever use this on their floors!
P.S. I'm a housewife so anyone wasting their time changing this answer to promote the sell of their eBook will get frustrated REALLY quick! se.
What else can I help you with?
How do you clean the Mop and Glo white residue film from floors?
To remove Mop and Glo white residue film from floors, mix equal parts water and white vinegar, then mop the affected area. The acidity of the vinegar helps dissolve the residue. You can also try using a commercial floor cleaner designed to remove wax buildup. Remember to rinse the floor thoroughly with clean water after cleaning.
How do you remove sticky residue from wood floors?
To remove sticky residue from wood floors, you can try using a mixture of equal parts vinegar and water. Apply the solution to the sticky area and let it sit for a few minutes before wiping it away with a clean cloth. You can also try using a commercial sticky residue remover specifically designed for use on wood floors.
Can you put mop and glow on brick floors?
No, it is not recommended to use Mop and Glow on brick floors. Brick is a porous material and using a product like Mop and Glow can lead to a buildup of residue on the surface, making it difficult to clean and maintain. It is best to use a cleaner specifically designed for cleaning brick floors.
How much ammonia do you use to clean hardwood floors?
To clean hardwood floors, mix one cup of ammonia with one gallon of warm water. Use a damp mop to apply the solution to the floor, working in small sections at a time. Be sure to rinse the floor with clean water afterwards to remove any residue.
How can I effectively remove white residue from water on surfaces?
To effectively remove white residue from water on surfaces, you can use a mixture of vinegar and water to clean the affected area. Simply spray the solution onto the surface and wipe it clean with a cloth or sponge. Vinegar is a natural and effective cleaner that can help dissolve and remove the white residue left behind by water.
How can I effectively use Goo Gone to remove tough stains and sticky residue from my hardwood floors?
To effectively use Goo Gone on hardwood floors, first test it on a small, inconspicuous area. Apply a small amount of Goo Gone to a clean cloth and gently rub the stained or sticky area. Wipe away any residue with a clean, damp cloth. Repeat as needed, then clean the area with a wood floor cleaner to remove any remaining Goo Gone residue.
What are some common uses of orange glo?
Orange Glo is commonly used for cleaning and polishing wood surfaces, such as hardwood floors and furniture. It can also be used to clean and shine other surfaces like laminate, vinyl, and tile. Additionally, Orange Glo can help remove dirt, grease, and grime while leaving a fresh citrus scent.
Is it ok to use orange glow to clean hardwood floors?
Using Orange Glow on hardwood floors can be effective, but it's important to check the product's compatibility with your specific floor finish. While it is designed for cleaning and maintaining wood surfaces, some formulations may leave a residue or cause damage over time. Always follow the manufacturer's instructions and test the product on a small, inconspicuous area first to ensure it won't harm your floors. Regular sweeping and damp mopping with a pH-neutral cleaner are generally recommended for hardwood care.
How do you clean the Mop and Glo white residue film from floors?
To remove Mop and Glo white residue film from floors, mix equal parts water and white vinegar, then mop the affected area. The acidity of the vinegar helps dissolve the residue. You can also try using a commercial floor cleaner designed to remove wax buildup. Remember to rinse the floor thoroughly with clean water after cleaning.
How do you remove sticky residue from wood floors?
To remove sticky residue from wood floors, you can try using a mixture of equal parts vinegar and water. Apply the solution to the sticky area and let it sit for a few minutes before wiping it away with a clean cloth. You can also try using a commercial sticky residue remover specifically designed for use on wood floors.
Can you put mop and glow on brick floors?
No, it is not recommended to use Mop and Glow on brick floors. Brick is a porous material and using a product like Mop and Glow can lead to a buildup of residue on the surface, making it difficult to clean and maintain. It is best to use a cleaner specifically designed for cleaning brick floors.
How much ammonia do you use to clean hardwood floors?
To clean hardwood floors, mix one cup of ammonia with one gallon of warm water. Use a damp mop to apply the solution to the floor, working in small sections at a time. Be sure to rinse the floor with clean water afterwards to remove any residue.
How do you clean a wood floor?
The best way is to use water only to keep from getting buildup on floors. occasionaly you can use a little vinegar with the water. I have tried everything to get my floors clean. I didn't like orange glo so I recomend not to use it It may work for you but not for mine.
How can I effectively clean tile floors with vinegar?
To effectively clean tile floors with vinegar, mix equal parts vinegar and water in a spray bottle. Spray the solution onto the tile floor and let it sit for a few minutes. Then, scrub the floor with a mop or brush to remove dirt and grime. Finally, rinse the floor with clean water to remove any remaining vinegar residue.
How can I effectively remove white residue from water on surfaces?
To effectively remove white residue from water on surfaces, you can use a mixture of vinegar and water to clean the affected area. Simply spray the solution onto the surface and wipe it clean with a cloth or sponge. Vinegar is a natural and effective cleaner that can help dissolve and remove the white residue left behind by water.
What does Cinderless mean?
"Cinderless" means something that does not produce cinders or residue. It can refer to a clean-burning material or process that does not leave behind ash or soot.
Can you steam clean bambo floors?
highly NOT recommended to steam clean any wood or laminate floors
