0
To make a 15% hydrochloric acid (HCl) solution, you need to dilute concentrated hydrochloric acid with water. The formula to calculate the volume of concentrated acid (C1) needed to make a desired volume of diluted acid (C2) is C1V1 = C2V2. For example, to make 1 liter of 15% HCl solution from a concentrated solution of 37% HCl, you would need to mix approximately 405 mL of the concentrated acid with 595 mL of water. Always remember to add acid to water slowly and with caution due to the exothermic nature of the reaction.
What else can I help you with?
How much of 35 percent HCl would be needed to make 1 percent HCl?
To make a 1% HCl solution from a 35% HCl solution, you would need to dilute the concentrated solution with water. The ratio of concentrated HCl to water would be approximately 1:34. So, to make 1% HCl, you would mix 1 part of the 35% HCl solution with 34 parts of water.
How do you make 2M HCL in 100ml from 36 percent Hcl?
Oh, dude, it's simple! To make 2M HCl in 100ml from 36% HCl, you'd need to dilute the 36% HCl with water. Just mix 5.56ml of 36% HCl with 94.44ml of water, and voila, you've got yourself some 2M HCl. It's like making a fancy cocktail, but with chemicals!
If a few drops of HCl spilled over into the CaCO3 sample error in the reported percent CaCO3 will result from this poor laboratory technique?
Yes, if HCl (hydrochloric acid) spilled into the CaCO3 sample, a chemical reaction will occur. This will alter the mass of CaCO3 present in the sample, leading to an error in the reported percent CaCO3 due to the loss of some CaCO3 in the reaction with HCl.
How do you make 50 percent HCL?
To make 50% hydrochloric acid (HCl), you would need to dilute concentrated hydrochloric acid (typically around 37%) with water. Measure out the appropriate amount of concentrated HCl and add an equal volume of water to achieve the desired concentration. Always add acid to water slowly and with stirring to prevent splashing or overheating.
What percent is 1 N HCL?
1 N HCl (hydrochloric acid) is equivalent to a concentration of 0.1 M (molarity), which means it contains 1 mole of HCl per liter of solution. The percentage of HCl in 1 N solution is about 3.65%, calculated based on the molecular weight of HCl.
How much of 35 percent HCl would be needed to make 1 percent HCl?
To make a 1% HCl solution from a 35% HCl solution, you would need to dilute the concentrated solution with water. The ratio of concentrated HCl to water would be approximately 1:34. So, to make 1% HCl, you would mix 1 part of the 35% HCl solution with 34 parts of water.
How can we make 5 littre 30.5 percent Hcl from 33 percent and 20 percent Hcl?
Let A be the volume of 33% HCl and B the volume of 20% HCl Then, A + B = 5.........so, B = 5 - A And, 33A + 20B = 5 x 30.5 = 152.5 Substituting for B gives :- 33A + 20(5 - A) = 33A + 100 - 20A = 13A + 100 = 152.5 Thus, 13A = 152.5 - 100 = 52.5 : A = 52.5/13 = 4.0385 Litres (4dp) Which means that B = 5 - 4.0385 = 0.9615 Litres Mix 4.0385 Litres of 33% HCL with 0.9615 Litres of20% HCl to get 5 litres of 30.5% HCl.
Why hcl is 37 percent pure?
i dont knw
How many percent concentration of hcl is 1normal?
0.084%
What does fifteen percent and twenty five percent make when you add them?
15% + 25% = 40%
Buspirone hcl 15 mg comparison xanax?
Buspirone hcl 14mg comparison to xanax
Three nickels make up what percent of a dollar?
1/2
How do you make 2M HCL in 100ml from 36 percent Hcl?
Oh, dude, it's simple! To make 2M HCl in 100ml from 36% HCl, you'd need to dilute the 36% HCl with water. Just mix 5.56ml of 36% HCl with 94.44ml of water, and voila, you've got yourself some 2M HCl. It's like making a fancy cocktail, but with chemicals!
Jim had 6 hits out of 15 what percent did he make?
6 out of 15 as a percentage = 100*6/15 = 40%
A number is increased by 15 percent to make 96 what is the number?
81, 96-15=81
How do you make a cone 8 ceramics glaze?
50 percent cornish stone 20 percent whiting 15 percent china clay 15 percent flint This will give you a good base cone 8 glaze
If a few drops of HCl spilled over into the CaCO3 sample error in the reported percent CaCO3 will result from this poor laboratory technique?
Yes, if HCl (hydrochloric acid) spilled into the CaCO3 sample, a chemical reaction will occur. This will alter the mass of CaCO3 present in the sample, leading to an error in the reported percent CaCO3 due to the loss of some CaCO3 in the reaction with HCl.
