unplug all wires under the seat and there are 4 nuts that are covered with rubber plugs, pull the rubber plugs off and you will see the 4 nuts, take the nuts off the welded in seat studs and pull the seat out.
Yes, cobalt can be used to remove aluminum ions from a solution through precipitation reactions or ion exchange processes. Cobalt forms insoluble cobalt hydroxide or cobalt aluminum oxide compounds with aluminum ions, allowing for their removal from the solution.
There are two pull pin levers in the top of the inside of the trunk, these levers are very close to you when you open the trunk, they pull out towards you horizontally. These levers can be difficult to find if you do not know where to look, just look at the top of the inside of the trunk towards the edge and you should find them. Pull on both to release the back seat latches and then pull the seats forward.
Yes, cobalt chloride and cobalt dichloride refer to the same compound. Cobalt chloride is also known as cobalt(II) chloride or cobalt dichloride, as it consists of one cobalt ion and two chloride ions.
Cobalt oxides are: cobalt(I) oxide, cobalt(II) oxide and cobalt(II,III) oxide.
Two compounds that contain cobalt are cobalt chloride (CoCl2) and cobalt sulfate (CoSO4). Both of these compounds are commonly used in various industrial and chemical applications due to the unique properties of cobalt.
Unplug it under the passenger seat.
The passenger airbag sensor in a 2008 Chevrolet Cobalt is typically located underneath the passenger seat. It is responsible for detecting the presence and weight of a passenger to determine whether to activate the airbag.
remove passenger seat in 2003 cadillac cts
You have to remove the Allen bolt on the rear of the passenger seat, then remove the two Allen bolts exposed when you removed the passenger seat. The driver seat should slide back and off now.
if you sit in the passenger seat it will be by your left foot
Remove front passenger seat on Lexus es300?
how to remove front passenger seat of 1996 Honda Civic EX 2 door coupe
You have to remove the 28 mm bolts at the rear of the passenger seat on either side of the tail light. Now slide the passenger seat back to release a clip holding the front edge of the passenger seat. Then remove the 12 mm bolts holding the seat to the frame.
A front passenger seat on a 2005 Honda Civic is held on by four bolts. Pull the seat back to loosen the front two. Pull the seat forward to reach the two rear bolts. Remove the seat.
the folding tray OS bolted to the passenger seat. the passenger seat must be removed in order to unbolt the tray from the seat.Do not remove the passenger seat. remove the cover that attached to metal bracket of p. seat. it's mounted with two plastic screws. use flat screw driver to remove. then you will see 3 bolts on the bracket attached to p. seat. remove bolts and pull away.
remove the passenger pad first, when removed it uncovers screws on the rear of the drivers seat. Remove these and it comes off.
Should be a bolt in each corner of the seat