answersLogoWhite

0

To raise alkalinity in a spa using borax, you can add 1/2 pound of borax per 500 gallons of water. Start by adding this amount, then retest your water after a few hours to check if the alkalinity has reached the desired level. Adjust as needed based on your test results.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Chemistry

Can you use 20 mule team borax to raise pH?

No, 20 Mule Team Borax is not recommended for raising pH in a pool or spa. It is primarily used as a laundry booster and cleaner. To raise pH in a pool or spa, you should use specific pool chemicals like soda ash or sodium carbonate.


What do you do if there is too much chlorine in spa?

If there is too much chlorine in your spa, you can dilute the water by adding more fresh water. Another option is to use a chlorine neutralizer to reduce the chlorine levels quickly. You can also leave the spa cover off for a few hours to allow the excess chlorine to dissipate.


What type of chemicals does one need to maintain a pool and spa?

To maintain a pool and spa, common chemicals include chlorine (to kill bacteria and algae), pH increaser/decreaser (to balance acidity levels), alkalinity increaser/decreaser (to prevent pH fluctuations), and shock treatment (to oxidize and remove contaminants). It's important to regularly test water quality and adjust chemical levels as needed for a clean and safe swimming environment.


Do spa chemicals go bad?

Yes, spa chemicals can go bad over time due to exposure to air, moisture, and light. This can lead to chemical degradation and a loss of effectiveness in maintaining water quality in the spa. It's important to store spa chemicals in a cool, dry place and check for expiration dates before use.


How do I clean a salt water spa?

To clean a salt water spa, you can use a non-abrasive cleaner and a soft cloth to wipe down the surfaces. It's important to regularly check and maintain the salt cell and clean the filter as needed. Additionally, balancing the water chemistry and regularly circulating and filtering the water will help keep your salt water spa clean.

Related Questions

Can you use 20 mule team borax to raise pH?

No, 20 Mule Team Borax is not recommended for raising pH in a pool or spa. It is primarily used as a laundry booster and cleaner. To raise pH in a pool or spa, you should use specific pool chemicals like soda ash or sodium carbonate.


How do you lower alkalinity in spa?

A small of amount of muriatic acid


What do you add to a pool when alkalinity is high and pH is fine?

It will take two steps to take care of this situation. First: Use acid to lower the alkalinity to the desired level. This will lower the pH also...so: Second: Add pH up to raise the pH. This will not raise the alkalinity. Kind of a pain. Try using soft water to fill if you're just filling a spa. A pool needs too much water, so it'll take two steps. If you're starting up a spa make sure to wait long enough between adding the chemicals and taking the next test, to allow the chemical reaction to occur. Run the pump(s) (no Air) for 30 minutes then wait at least three hours before the next test.


You have high pH and low alkalinity-should you add both alkalinity increase and muratic acid?

You may want to add muriatic acid in small amounts more frequently - say every 20 minutes. The alkalinity will take care of itself. Be sure of your test results. You may have old test solutions or an old test kit. If you have access to digital testing equipment that may be more accurate. The addition of baking soda in small amounts will raise the alkalinity. Monitor it about 20 min. after application with a good test kit. To keep your pH from rising too much add the acid as above. Keep this up until the alkalinity is close to the minimum rating for alk. Test again the next day to see of it has stabilized. If not continue the application of baking soda. This may take from hours to days to correct. If you have a small body of water, like a spa, it is easier, quicker to change the water.


How much money does a spa owner make a year?

If I owned a spa/Winery in Tuscany Italy....How much would I make a year?


What can you do with a spa management degree?

Various options are available with a Spa Management degree. You can focus on Spa Design, be a personal services consultant, be a general spa manager, do spa marketing and promotions and much more.


How much does a day spa manager earn?

it depends whether he is good at his job, bad at his job and where he has his spa!


How much does a new spa pump cost?

The price of a spa pump will vary depending on brand, size and power required for the spa. Generally, spa pumps will cost in the region of å£40 or $70.


What cause a new SALT water spa to foam extremely?

Bathers contribute body oils to the spa. Foaming is usually caused by a reaction of body oils and cosmetic residues with the alkalinity of the water. This can lead to the formation of "soaps" and foamy water. The foam can be eliminated by using Anti-foam and enzyme products periodically.


How do you raise cyanuric acid levels in a spa?

Cyanuric acid is generally called chlorine stabilizer and it is used to prevent the suns UV rays from eating up the chlorine in outdoor pools. Because most spa's are covered when not in use this is generally not a concern for spa or hot tub owners. If you do however have an outdoor uncovered spa and you wish to raise the CYA level you would simply visit your local pool supply store and purchase some chlorine stabilizer, just ask for cyanuric acid and they will know what to get you.


How do you convice your parents to go to the spa?

Tell them you will do a much needed task for the family, and ask for your reward to be a trip to the spa.


How much is a loreal hair spa kit for?

cost