answersLogoWhite

0

Cyanuric acid is generally called chlorine stabilizer and it is used to prevent the suns UV rays from eating up the chlorine in outdoor pools. Because most spa's are covered when not in use this is generally not a concern for spa or hot tub owners.

If you do however have an outdoor uncovered spa and you wish to raise the CYA level you would simply visit your local pool supply store and purchase some chlorine stabilizer, just ask for cyanuric acid and they will know what to get you.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What level of cya should a spa be?

For a spa, the recommended level of cyanuric acid (CYA) should typically be between 30 to 50 parts per million (ppm). This range helps stabilize chlorine, ensuring effective disinfection while minimizing chlorine loss due to sunlight. Regular testing and adjustments may be necessary to maintain optimal levels for water clarity and safety.


How do you lower alkalinity in spa?

A small of amount of muriatic acid


If the chlorine levels are correct but PH is constantly high what is the best solution?

I have the same problem with my 2000 gal. in-ground spa. Each week I have to add muriatic acid to reduce the PH. Since my spa is small, in relation to a pool, I usually only have to add about 1/4 - 1/2 cup of acid to bring the PH down to the perfect range.


What causes foam in a spa how do you control the PH and Bromine in a spa?

Get a Bromine test kit and a pH test Kit. The bromine level should be around 4.0ppm and the pH should be around 7.4.To raise Bromine, add Bromine.To lower Bromine, add waterTo raise pH: add soda AshTo lower pH: add Muriatic AcidAs for the foam, it is caused by tanning oils, sunblocks, shampoos, conditioners, soap, body oil, fabric cleaners etc. To correct this problem add hexametaphosphate or "Foam Out".


What to do if bromine levels in spa are too high?

If bromine levels in a spa are too high, you can lower them by adding a bromine reducer or diluting the water with fresh water. You can also turn off the bromine feeder and run the spa without adding any more bromine for a few days to let the levels naturally decrease. Regularly test the water to monitor the bromine levels until they are within the appropriate range.


Do you use a decreaser to lower your pH levels?

Yes, a decreaser like muriatic acid or sodium bisulfate can be used to lower pH levels in a pool or spa. It is important to follow instructions carefully as improper use can be harmful to both the water and the equipment. Regular testing and adjustments are recommended to maintain proper pH balance.


What is mild solution of muriatic acid?

A 10 to one ratio is mild. Pool & Spa


Spa bromine test turns orange?

If a spa bromine test turns orange, it usually indicates a high level of bromine in the water. This may be due to over-dosing the spa with bromine tablets or shock treatment. It is recommended to stop adding bromine until the levels return to normal and ensure proper water circulation and filtration to help lower the bromine levels.


Can you use 20 mule team borax to raise pH?

No, 20 Mule Team Borax is not recommended for raising pH in a pool or spa. It is primarily used as a laundry booster and cleaner. To raise pH in a pool or spa, you should use specific pool chemicals like soda ash or sodium carbonate.


How much borax to raise alkalinity in spa?

To raise alkalinity in a spa using borax, you can add 1/2 pound of borax per 500 gallons of water. Start by adding this amount, then retest your water after a few hours to check if the alkalinity has reached the desired level. Adjust as needed based on your test results.


Can you leave a spa empty?

Yes, you can leave a spa empty, but it's generally not recommended. Emptying a spa can lead to damage from sunlight exposure or debris buildup. Additionally, if left empty for an extended period, components like the pump and heater may suffer from deterioration. It's best to maintain water levels and proper care to ensure the longevity of your spa.


How long does a heat pump take to heat a spa?

The time it takes for a heat pump to heat a spa depends on several factors, including the spa's size, the starting water temperature, the desired temperature, and the heat pump's capacity. Typically, a heat pump can raise the temperature of a spa by about 1 to 3 degrees Fahrenheit per hour. Therefore, heating a spa from a cool temperature to a comfortable level can take anywhere from several hours to a full day, depending on these variables. Proper insulation and covering the spa can help speed up the heating process.