The amount of sulfuric acid in a 36 volt battery depends on the size and type of the battery. In general, lead-acid batteries (commonly used in vehicles) contain a diluted sulfuric acid solution, with the concentration typically around 30-35% sulfuric acid by weight. The actual volume of sulfuric acid in a 36 volt battery would need to be calculated based on the specific characteristics of the battery.
When selecting a 6 volt lead acid battery for a specific application, key specifications to consider include capacity (measured in ampere-hours), voltage, size and weight, cycle life, charging requirements, and compatibility with the application's power needs. It is important to choose a battery that meets the power and energy requirements of the application while also considering factors such as durability and maintenance needs.
The PP3 battery, commonly known as a 9-volt battery, is not a single voltaic cell. It consists of six smaller 1.5-volt cells connected in series to provide a total of 9 volts.
A 9-volt battery is a type of rectangular battery that is commonly used in smoke alarms, garage door openers, and other electronics. It typically has a voltage of 9 volts and is composed of six smaller 1.5-volt cells stacked together in a single casing.
The lithium battery was invented by chemist M. Stanley Whittingham in the 1970s while working at Exxon. His work laid the foundation for the development of the modern rechargeable lithium-ion battery.
The amp-hour rating of a battery depends on its capacity. Typically, a 1.5V nickel-cadmium battery may have a capacity ranging from 600mAh to 1000mAh. To find the amp-hour rating, you would divide the capacity (in mAh) by 1000.
That depends on the physical size of the battery.
there are 7, 2 hydrogen, 2 sulphur and 4 oxygen.Answerthat above is wrong =.=" its there are 7, 2 hydrogen, 1 sulphur and 4 oxygen...
No, a lead acid battery is a wet cell battery and a 9 volt alkaline battery is a dry cell battery.
* dsawdasdadwwwwwwgfw
It depends on what the 6 cells are, but the battery voltage is just 6 times the cell voltage. In a car battery (lead-acid cells) - 12V In a dry-battery (zinc-carbon cells) - 9V
Not all 12 volt batteries actually use acid. Lead/acid storage batteries do, however, and in those the acid is generally 4-5 molar sulfuric acid. "How much" acid depends on the volume of the battery ... some batteries are physically larger than others ... but for a rough figure you can assume that somewhere around 30% of the liquid by mass is sulfuric acid.
Group 26r, 12 volt, lead acid automotive battery.
AnswerAccording to WikiPedia (http:/en.wikipedia.org/wiki/Rechargeable_battery), the nominal cell voltage of a Lead Acid wet-cell battery is 2.1 volts, this implies there are 6 cells in a 12 volt Lead Acid wet-cell battery.
The 6 cell, 12 volt lead acid battery.
For lead-acid chemistry, as in a car battery, think 13.6 volts DC.
No, you should not charge a 6-volt 4.5Ah sealed lead acid battery with a 12-volt charger, as the voltage is too high and could damage the battery. Sealed lead acid batteries need to be charged at their specified voltage, typically around 7.2 to 7.4 volts for a 6-volt battery. Using a charger with the correct voltage and current rating is essential for safe and effective charging. Always select a charger designed for the specific voltage and chemistry of your battery.
That would depend on the size of the battery, you want the amps of the charger to be reasonably proportional to the capacity of the battery.