That depends on the physical size of the battery.
The amount of sulfuric acid in a 36 volt battery depends on the size and type of the battery. In general, lead-acid batteries (commonly used in vehicles) contain a diluted sulfuric acid solution, with the concentration typically around 30-35% sulfuric acid by weight. The actual volume of sulfuric acid in a 36 volt battery would need to be calculated based on the specific characteristics of the battery.
there are 7, 2 hydrogen, 2 sulphur and 4 oxygen.Answerthat above is wrong =.=" its there are 7, 2 hydrogen, 1 sulphur and 4 oxygen...
No, a lead acid battery is a wet cell battery and a 9 volt alkaline battery is a dry cell battery.
* dsawdasdadwwwwwwgfw
It depends on what the 6 cells are, but the battery voltage is just 6 times the cell voltage. In a car battery (lead-acid cells) - 12V In a dry-battery (zinc-carbon cells) - 9V
Not all 12 volt batteries actually use acid. Lead/acid storage batteries do, however, and in those the acid is generally 4-5 molar sulfuric acid. "How much" acid depends on the volume of the battery ... some batteries are physically larger than others ... but for a rough figure you can assume that somewhere around 30% of the liquid by mass is sulfuric acid.
Group 26r, 12 volt, lead acid automotive battery.
AnswerAccording to WikiPedia (http:/en.wikipedia.org/wiki/Rechargeable_battery), the nominal cell voltage of a Lead Acid wet-cell battery is 2.1 volts, this implies there are 6 cells in a 12 volt Lead Acid wet-cell battery.
The 6 cell, 12 volt lead acid battery.
For lead-acid chemistry, as in a car battery, think 13.6 volts DC.
No, you should not charge a 6-volt 4.5Ah sealed lead acid battery with a 12-volt charger, as the voltage is too high and could damage the battery. Sealed lead acid batteries need to be charged at their specified voltage, typically around 7.2 to 7.4 volts for a 6-volt battery. Using a charger with the correct voltage and current rating is essential for safe and effective charging. Always select a charger designed for the specific voltage and chemistry of your battery.
That would depend on the size of the battery, you want the amps of the charger to be reasonably proportional to the capacity of the battery.