0
yes, i think the term neutralisation is appropriate for all acid base titration. My reason is that in the titration of acid and base a proportion of acid is transfered to the base and the reaction is often calledd nuetralisation and the product is salt. Moreover the normal ph of salt is 7 exept if it has been hydrolysed leading to an increase or decrease in (H+) hydrogen ion
What else can I help you with?
How do you get accurate titration value?
To get an accurate titration value, ensure that all reagents are standardized and accurately measured, use an appropriate indicator, perform the titration slowly and carefully, and repeat the titration for consistency. Calibration and proper maintenance of equipment are also important for accuracy.
Is iodometric titration and redox titration is same?
No, they are not the same, but 1 is part of 2.Iodometric titration is just one of the (larger) group (or class) of oxidimetric titrations, which in turn is part of the much (larger) group (or class) of volumetric analysis method.
Why is phenolphthalein an appropiate indicator for back titration?
Phenolphthalein is appropriate for back titration because it undergoes a color change in a specific pH range (pH ~8.2-10), making it useful for detecting excess acid or base after a reaction is complete. In back titrations, where the analyte is in excess and the titrant is limited, phenolphthalein helps determine the amount of excess analyte present by signaling the endpoint of the reaction.
Why you rinse titration flask with water?
Rinsing the titration flask with water is done to ensure that all of the titrant (the solution being titrated) is transferred into the flask for accurate measurements. By rinsing, you can be sure that no titrant is left behind on the walls of the flask, ensuring a complete reaction during the titration process.
When to use back-titration instead of direct titration?
Back-titration is useful when the analyte reacts slowly or not at all with the indicator used in direct titration. It is also used when the endpoint of the direct titration is not clearly visible. Additionally, back-titration is employed when the analyte is present in very low concentrations and requires a larger amount of titrant for direct titration.
How do you get accurate titration value?
To get an accurate titration value, ensure that all reagents are standardized and accurately measured, use an appropriate indicator, perform the titration slowly and carefully, and repeat the titration for consistency. Calibration and proper maintenance of equipment are also important for accuracy.
What indicator in titration of sodium carbonate solution against hydrochloric acid would give a complete neutralization?
The indicator methyl orange can be used in the titration of sodium carbonate solution against hydrochloric acid to give a complete neutralization. At the endpoint, when all the carbonate ions have reacted to form bicarbonate ions, the solution will turn from yellow to pink.
When an acid is analyzed by adding a measured quantity of base the point at which all the acid has reacted is called?
Neutralization point, point of equivalency, is in (volumetric) titration best approached by the endpoint or indication point.
Are all reactions titration reactions?
nope
Is iodometric titration and redox titration is same?
No, they are not the same, but 1 is part of 2.Iodometric titration is just one of the (larger) group (or class) of oxidimetric titrations, which in turn is part of the much (larger) group (or class) of volumetric analysis method.
Why is phenolphthalein an appropiate indicator for back titration?
Phenolphthalein is appropriate for back titration because it undergoes a color change in a specific pH range (pH ~8.2-10), making it useful for detecting excess acid or base after a reaction is complete. In back titrations, where the analyte is in excess and the titrant is limited, phenolphthalein helps determine the amount of excess analyte present by signaling the endpoint of the reaction.
Why you rinse titration flask with water?
Rinsing the titration flask with water is done to ensure that all of the titrant (the solution being titrated) is transferred into the flask for accurate measurements. By rinsing, you can be sure that no titrant is left behind on the walls of the flask, ensuring a complete reaction during the titration process.
When to use back-titration instead of direct titration?
Back-titration is useful when the analyte reacts slowly or not at all with the indicator used in direct titration. It is also used when the endpoint of the direct titration is not clearly visible. Additionally, back-titration is employed when the analyte is present in very low concentrations and requires a larger amount of titrant for direct titration.
What is the aim of precipitation titration?
The aim of precipitation titration is to determine the concentration of a substance by adding a titrant solution that causes a precipitate to form. The endpoint of the titration is reached when the precipitate begins to form, indicating that all the analyte has reacted.
What is Fajan's method of argentometric titration?
Fajan's method of argentometric titration involves the use of potassium chromate as an indicator to detect the end point of a titration between silver ions and chloride ions. The indicator changes color from yellow to red when all the chloride ions have reacted with the silver ions, marking the end point of the titration.
Why does blank titration shows the higher value compared to sample titration in iodine value?
In blank titration, no sample is present to react with the iodine solution, leading to an apparent excess of iodine. This can result in a higher value as all the iodine being counted towards the blank. In sample titration, the sample reacts with the iodine, leading to a lower amount of iodine available to react, resulting in a lower value compared to the blank titration.
What product do all neutralization reactions have in common?
They all produce water, and a type of salts. NaOH + HCL ---> H2O + NaCl KOH + HCl ---> H2O + KCl
