Depends on how accurate you need to be.
Ideally 56.11g of KOH made up to 1L.
Dissolve 56.11g in say 500ml then make up to 1l using water - 1l volumetric is the way to go.
If you need 1000L then I would suggest 56.11kg chucked into 1000L
All the best
Chat with our AI personalities
To prepare a 1M KOH (potassium hydroxide) solution, you would need to dissolve 56.11 grams of KOH pellets in enough water to make 1 liter of solution. Be sure to wear appropriate protective gear and handle KOH with caution, as it can cause burns and is corrosive.
First, you will need about 5.7g of KOH. Then you will dissolve the KOH solution in 1dm of water.
18 grams of KOH add 10 ml of water dilut with methanol to 500 ml. allow to stand for 24 hours
No, 1M KOH (potassium hydroxide) does not equal 1M C7O2H7 (pimelic acid). They have different chemical formulas and properties, so their molarities cannot be equated in general chemical reactions or calculations.
To prepare a 30% methanolic KOH solution, you would mix 30g of KOH with enough methanol to make a total solution volume of 100mL. This would result in a solution where 30% of the total weight comes from KOH. Be cautious when handling KOH as it is a caustic substance and should be handled with appropriate precautions.
To find the molarity of the KOH solution, we need to know the concentration of the KOH solution in moles per liter. Without this information, we cannot calculate the molarity.
To dilute the 5M KOH solution to 3M, we can use the formula: M1V1 = M2V2, where M1 = initial molarity, V1 = initial volume, M2 = final molarity, and V2 = final volume. Plugging in the values, we get: (5M)(0.5L) = (3M)(V2). Solving for V2 gives V2 = 0.5 * 5 / 3 = 0.833 L. So, 0.833 liters of 3M KOH solution can be prepared by diluting 0.5L of 5M KOH solution.
The reaction between HBr and KOH is a 1:1 ratio. This means that the moles of HBr present in the solution will be equal to the moles of KOH used in the neutralization reaction. Using this information and the volume and concentration of KOH used, you can calculate the concentration of the HBr solution.