I'm finding it difficult to find Figure A-4. I mean, it's as though you've just copied and pasted the question from your homework or something. I'm sure you'd never do that though would you?
Metals are good conductors. Some non-metals are good conductors, but many others are not.
Sulfur is a nonmetal. Nonmetals are bad conductors, while metals are good conductors. Since sulfur is a bad conductors, it is a good insulator.
Some nonmetallic materials are good conductors, graphite being an example. In this form, it is considered a semi-metal for that reason. Normally, however, nonmetals are not good electrical conductors.
The same reason that all conductors are conductors: it has a lot of free electrons.
Metals are conductors, not insulators. Both electrical and thermal conductors.
Electricity is the flow of electrons through a cable. Electronics is set of conductors and semi-conductors (again kind of cables) through which electrons flow in specific way, needed by the machine.
In every conceivable area of electronics. From navigation systems, to computers, cell phones and radios.
Renesas Electronics Corporation is a Japanese manufacturer of semiconductor devices. It also manufactures microcontrollers and application processors, as well as LCD drivers, RF ICs, mixed signal integrated circuits and system-on-a-chip semi-conductors.
Passive components like capacitors . resistors and coils then there are active components like amplifiers and IC. wires are not electronics anything but just conductors of electrons. rain nerves and heart capacitors resistors, transistor of course wire
The Materials are of three kinds:- Conductors- Semiconductors and- InsulatorsThe Insulators have the property to stop the flow of electricity, because they have less number of free electronics... by: gloria & tatiana
Semiconductors might sound somewhat 'inferior' in comparison to 'conductors', but they are - due to their unique properties - indispensable in modern electronics. Semiconductors, generally, make it easily possible to control the direction and flow of electric current which is the basis of most modern electronic device.
A much pondered question. The borderline is very fuzzy and mostly in the eye of the beholder. Electronics, in my view, is the study of active devices and their interrelationship. An electric motor is electrical, but the ignitrons and their control devices that control it are electronic. The dividing line for many years was whether it required semi-conductors, if so, it was electronics rather than just electrics.
b
Electronics refers to anything that requires electricity to run. A semi conductor is a material that has some properties of a conductor, meaning it allows electricity to flow through it well and some properties of an insulator, meaning it does not allow the flow of electricity through it well. Semi conductors are used extensivly in modern electronics and circuit boards. the queastion makes no sense - check what you are asking
Yes, metalloids used in electronics are called semiconductors.
Microelectronics is a subfield of electronics. Microelectronics, as the name suggests, is related to the study and manufacture, These devices are made from semiconductors. Many components of normal electronic design are available in microelectronic equivalent: transistors, capacitors, inductors, resistors, diodes and of course insulators and conductors can all be found in microelectronic devices.
They are Conductors, not much for insulation though. Differences between conductors and insulators? Conductors let energy such as electricity .